html - Catalog FORMAT plus - 2017 - 2018

Torque-multiplication device 1135

GEDORE torque multiplier DREMOPLUS ALU

Benefits: • Slim and light design allows comfortable and safe working also in particularly tight spots. • Repeat accuracy, precise results • High durability and longevity due to low-backlash planetary gear heads with ceramic PTFE coating • Casing more than 30% lighter compared to steel casing due to high-performance aluminium • Each torque multiplier is checked for torque range and equipped with an individual test certificate • High-quality finish - made in Germany

Selecting the correct reaction arm: Z-Form Cranked shape to support on neighbouring screws, walls, machine parts or other stable resistance. Ideal where space is limited. L-Form Straight shape with adjustable reaction arm. Ideal for screw joints, provides a larger radius for the support than the Z form. Can also be supported at points that are higher than the screw plane, but this reduces the maximum permissible torque by 20%.

Torque multiplier DREMOPLUS ALU

Design: Housing made of high-performance aluminium, reaction arm forged from chrome- vanadium steel for safe interception of the counter forces. High precision, single-stage planetary gearbox for high durability and exact torque transfer. The guaranteed accuracy is better than ± 3% tolerance. Square drive with bore for receiving power wrench inserts with locking pin and rubber ring. Application: For controlled tightening of screws and loosening fittings with a torque wrench. Ideal for bridge, ship, aircraft, railway as well as machine and plant engineering in industry, refineries, commercial vehicles, automotive engineering and construction sites. Scope of delivery: Torque multiplier with integrated reaction arm, manufacturer's test certificate, adjustment table and sturdy transport case with foam insert. Note: Power screwdriver bits from Ç 6/92.

Zertifikat C tificate

6252 1300

6252 1300

Overload protection by means of sun gear. If the drive is overloaded by excessive forces, the sun gear is damaged and not the entire motor. After replacing the sun gear, the torque multiplier is ready for use again.

6252 2800 + 2801

Overload protection by means of shearing square. If the motor is overloaded by excessive forces, the output square turns off. The motor won't be damaged. After replacing the square drive, the torque multiplier is ready for use again.

6252 2800

6252

Hand Tools 6

Initial torque N•m

Order No.

Reaction arm

Transmission ratio

Square drive

Square drive

Maximum input torque N•m

Weight

inch 1/2 3/4 3/4

inch 3/4

kg

1300 2800 2801

250–1300 500–2800 500–2800

1282.00 2085.00 1670.00

Z-Form L-Form Z-Form

1:5.0 1:5.5 1:5.5

270 550 550

1.9 3.4 3.9

1 1

(W522)

Torque multiplier

Design: Aluminium housing, with a backstop. High precision of ± 5 %. Application: For controlled tightening of screws and loosening fittings with a torque wrench. Ideal for ship, machine and plant engineering in industry and automotive engineering. Note: Power screwdriver bits from Ç 6/92.

6253

Max. initial torque N•m

Order No.

Reaction arm

Transmission ratio

Square drive

Square drive

Maximum input torque N•m

Weight

inch 3/4 3/4 3/4

inch

kg

1400 1401 2801

1400 1400 2800

1084.00 1236.00 2127.00

Z-Form Z-Form Z-Form

1:3.5 1:3.5 1:11

1 1 1

420 420 254

3.77 4.65 7.26

(W529)

6/115

Articles marked ◊ are not held in stock, procurement is effected at short notice.