html - Catalog FORMAT plus - 2017 - 2018

Screwdriver 1139

What is rust? If stainless steel parts (e.g. screws) are machined with a normal tool, this tool leaves behind steel particles that firmly adhere to the stainless steel. These steel particles can rust only in combination with oxygen and thus produce unsightly rust on the actually non- rusting stainless steel. Stainless steel tool (Stainless) for rust prevention

How is rust prevented? Through the use of tools, which are also made of stainless steel and are used solely for the processing of stainless steel parts. Due to the vacuum ice-hardening, these tools have the necessary hardness and strength, also use without restrictions is possible.

Stainless slot screwdriver

Design: Made of stainless steel. Round blade, tough (54 HRC), with laser tip and micro rough surface. This reduces the contact force and prevents the screw head from sliding out. Due to vacuum ice-hardening the blade has a hardness requirement comparable to that of conventional tools and is therefore 100% workshop fit and wear-resistant. With 3-component Kraftform-Plus handle, ergonomic, with integrated soft zones for a better grip and hexagonal anti-roll protection. In addition, the screwdrivers have a head embossing with output symbol and size. Application: Special product for preventing rust in the processing of stainless steel screws.

INOX

Lasertip

6277

Blade width mm

Order No. 0030 0035 0040 0055 0065 0080

Blade thickness mm

Blade length mm

Total length mm

3.0 3.5 4.0 5.5 6.5 8.0

5.25 *

0.5 0.6 0.8 1.0 1.2 1.2

80 100 100 125 150 175

161 181 198 223 255 287

5.50 5.80 7.70 9.40

12.40 (W584)

* Without laser tip.

VDE slot screwdriver

Design: Made of high-alloy special steel. With round, insulated blade Handle and blade insulated to 1000 V, according to IEC 60900, DIN EN 60900, VDE 0682/Part 201. In addition, the screwdriver head is embossed with output symbol and size.

Hand Tools 6

6278

Special coating for more torque and fit. With 2-component handle, ergonomic, with integrated soft areas and roll-off protection.

6278

6282

With laser tip and micro rough surface. This reduces the contact force and prevents the screw head from sliding out. With 3-component Kraftform Plus handle, ergonomic, with integrated soft areas for better grip and hexagon roll-off protection.

6282

Lasertip

6281

Reduced blade diameter for turning deep screws and spring clips. With 3-component Kraftform Plus handle, ergonomic, with integrated soft zones for a better grip and hexagonal anti-roll protection.

6281

6282

6281

6278

Blade width mm

Order No. 0025 0030 0035 0040 0045 0055 0060 0065 0070 0080 0081 0100

Blade thickness mm

Blade length mm

Total length mm

6278

6282/6281

2.5 3.0 3.5 4.0 4.0 5.5 5.5 6.5 6.5 8.0 8.0

2.20 2.23 2.38 2.87

4.05 * 4.16 *

– –

0.4 0.5 0.6 0.8 0.8 1.0 1.0 1.2 1.2 1.2 1.6 1.6

80 100 100 100 150 125 200 150 200 175 200 200

161 181 181 198

161 181 181 198 248 223 298 255 305 287 312 312

4.40 5.25 6.00 5.85 6.50 7.90 8.70 8.65 8.65

6.60 7.85

–

–

–

3.32

8.90

223

–

– – – – – –

–

4.20

248

–

–

5.65

283

– –

– –

10.0

10.95 (W543)

(W542)

(W543)

* Without laser tip.

6/119

Articles marked ◊ are not held in stock, procurement is effected at short notice.