html - Catalog FORMAT plus - 2017 - 2018

Screwdriver bits 1174

Design: HSS, DIN 335-C. 90° countersink angle. Radial taper-ground, bright surface, with straight clamping slots and drilling spaces ground from full pieces. Also provided with cutting and clearance angles for the most common materials. The hexagonal shank (1/4" bit shank according to DIN 2126) causes a 100 % power transfer, thus in every bushing the countersink is extremely slip-free. Application: Suitable for universal chatter and burr-free drilling, countersinking, milling and deburring work. The countersink bit can also be used as hand deburring together with the corresponding activation tools such as grips, toggles or ratchets with a 1/4" hexagon mount. Note: Sufficient supply of coolant is essential. Order No. Nominal ∅ mm 1420 Smallest ∅ mm Total length mm For countersink screws 0630 6.3 4.86 1.5 31 M3 0830 8.3 5.75 2.0 31 M4 1040 10.4 6.60 2.5 34 M5 (W134) Countersink bit 90° with 1/4" hexagonal shank Design: Supplied in a robust, high quality plastic cassette with automatic countersink setup function when opened incl. universal holder with 1/4" allen mount and drilling paste. Countersink bit set 90° with hexagonal shaft

DIN 335-C

Z 3

HSS

1/4"

1420

Nominal ∅

Order No.

Smallest ∅

Total length mm

For countersink screws

mm 12.4 16.5 20.5

mm 2.8 3.2 3.5

1240 1650 2050

8.90 9.95

35 40 41

M6 M8

11.75 (W134)

M10

1422

Design

Order No. 0005

Nominal ∅ mm 6.3–20.5

9-part

70.40 (W134)

Cutting tap 1/4" bit DIN 3126

Design: Tap bit, 1/4" hexagon mount for metric ISO thread according to DIN 13. Application: Cutting tap bits are designed for thread tapping with cordless screw drills and handheld drills with left and right motion. However, they are also suitable for tapping by hand and on stationary drilling machines. Your cordless screw drill should have a minimum power of 7.5 Volt. Make sure that the tool axis and hole axis are precisely aligned and use appropriate cutting oil. rpm: lowest settings (0–450 min -1 ), torque: maximum setting.

Hand Tools 6

DIN 13

M

HSS

1/4"

1649

1649

Nominal ∅

Nominal ∅

Order No.

Total length mm

Cutting edge length mm

Width of keys mm

Order No.

Total length mm

Cutting edge length mm

Width of keys mm

mm M3 M4 M5

mm

0030 0040 0050

3.45 3.45 4.26

33 35 36

11 12 15

6.35 6.35 6.35

0060 0080 0100

M6 M8

4.26 6.20 7.25

39 40 41

18 19 21

6.35 6.35 6.35

M10

(W161)

(W161)

Cutting tap 1/4" bit set DIN 3126

Design: Supplied in a plastic box.

1649

Size

Order No.

Set contents

0105 M3–M10 27.30 6 tap bits M3; 4; 5; 6; 8; 10 0110 M3–M10 43.90 1 bit-holder 6 tap bits, M3; 4; 5; 6; 8; 10 6 core hole drill bits, ∅ 2.5; 3.3; 4.2; 5.0; 6.8; 8.5 (W161)

1649 0110

6/154