html - Catalog FORMAT plus - 2017 - 2018

Screwdriver bits 1176

Combi-bit SGE 1/4" DIN 3126

Design: With cross-grinding and 1/4" hexagon shaft. Application: For drilling core holes, thread tapping and deburring in one step. Combi-bits are designed for thread tapping with cordless drills and handheld drills with left and right motion. However, they are also suitable for tapping on stationary drilling machines. Material thickness not more than nominal thread ∅ (M6 = 6 mm material thickness). Particularly suitable for assembly work and small batches. Please ensure that the tool axis and hole axis are precisely aligned and use appropriate cutting oil (order no. 9829). Note: The heat-treated induction zone allows for increased bending elasticity, thus significantly reducing the risk of fracture, thereby up to 50% longer life .

HSS HSS-E

M

60°

≤ 1xd

1/4"

1656 1657

HSS

HSS-E

1657

1657

Thread 1656

Thread 1656

Order No.

Gradient

Drill ∅ mm

Order No.

Gradient

Drill ∅ mm

Total length mm

Total length mm

mm

mm

0001 0003 0005 0007

M3 5.65 8.90 M4 5.65 8.90 M5 5.65 8.90 M6 5.65 8.90

0.50 2.5 0.70 3.3 0.80 4.2 1.00 5.0

36 39 41 44

0009 0011 0013

M8

7.70 10.25 9.40 12.25

1.25 6.8 50 1.50 8.5 59 1.75 10.2 66

M10

M12 14.45 23.20

(W161)

(W161)

(W161)

(W161)

Combi-Bit-SGE set 1/4" DIN 3126

HSS

1656 1657 Design: Supplied in a plastic box. HSS HSS-E

HSS-E

1657

1656

Size

Order No.

Set contents

0020 M3–M10 43.60 61.90 1 Bit holder with adapter 6 combi-bits M3; 4; 5; 6; 8; 10 (W161) (W161)

Hand Tools 6

Cutting tap bit HexTap S

Design: Tap and die bit, 1/4" hexagonal drive for pipe threads according to DIN ISO 228. Application: Cutting tap bits are designed for thread tapping with cordless screw drills and handheld drills with left and right motion. However, they are also suitable for tapping by hand and on stationary drilling machines. Your cordless screw drill should have a minimum power of 7.5 Volt. Make sure that the tool axis and hole axis are precisely aligned and use appropriate cutting oil.

DIN ISO 228

G

HSS

1649

Nominal ∅ inch

Order No.

Total length mm

Cutting edge length mm

Width of keys mm

1/4"

0250

G 1/8 6.90

40.5

17

6.35

(W161)

6/156