html - Catalog FORMAT plus - 2017 - 2018

Cup brushes 1268

Cup brush, crimped

Design: With crimped wire. Suitable for all standard one-hand angle grinders. Thread M14 x 2.0. Application: For use for minor to moderate cleaning and for working with large surfaces. For roughing and matting and for the removal of paint, varnish, burrs, rust, scale, etc. Note: Observe safety recommendations.

7032 7034 7029

Hardened steel wire.

Stainless steel wire (1.4310).

7032

Stranded steel wire filaments for reduced wire breaks and gentle stripping. Especially for fine, satinised surface grinding.

7034

7034

7029

7032

Brush ∅

Order No.

Wire thickness mm

Max. speed RPM min -1

mm

0060 0080

60 80

4.12

7.85

9.70

0.3 0.3

12500 8500

10.85 (W566)

15.05 (W566)

17.50 (W566)

7029

Cup brush, knotted

Design: Aggressive design with knotted wire. Suitable for all standard one-hand angle grinders, smooth running. Thread M14 x 2.0. Application: For aggressive use during heavy-duty cleaning tasks and when working on large surfaces. For the removal of paint, burrs, cinder, rust, scale, etc. Note: Observe safety recommendations.

7036 7038

Hardened steel wire.

Stainless steel wire (1.4310).

7038

7036

Brush ∅ mm

Order No. 0005 0010

Wire thickness mm

Max. speed RPM min -1

7036

65 65

6.65 6.25

12.80 12.05 (W566)

0.35 0.50

12500 12500

(W566)

7038

Cup brush, knotted, with support ring

Design: Aggressive design with knotted wire. With removable support ring, so that the trim can make way when speeds or loads are too high. Suitable for all standard one-hand angle grinders, smooth running. Thread M14 x 2.0. Application: For aggressive use during heavy-duty cleaning tasks and when working on large surfaces. For the removal of paint, burrs, cinder, rust, scale, etc. Note: Observe safety recommendations.

7040 7042

Hardened steel wire.

Hand Tools 7

Stainless steel wire (1.4310).

7042

7040

Brush ∅ mm

Order No. 0080 0081 0082 0100 0101 0102

Wire thickness mm

Max. speed RPM min -1

7040

80 80 80 100 100 100

14.25 14.00 13.85 16.55 16.15 15.85 (W566)

–

0.35 0.50 0.80 0.35 0.50 0.80

8500 8500 8500 8500 8500 8500

29.70

– – – –

7042

(W566)

Cup brush, knotted

Design: Aggressive design with knotted wire. Mounting shaft ∅ 6 mm. Application: For aggressive use in flat surface processing. For roughing and for the removal of paint, burrs, cinder, rust, scale, etc. Note: Observe safety recommendations.

7033

Brush ∅ mm

Order No. 0065

Wire thickness mm

Max. speed RPM min -1

65

9.15

0.5

6000

(W566)

7/8