html - Catalog FORMAT plus - 2017 - 2018

Benders 1300

Tube benders

Design: Lightweight construction with one fixed and one moving bending arm. Bending radius display with degree scale of 0–180° in steps of 30° and clamping device to hold the pipe better. Moveable bending arm with plastic handle. Application: For dimensionally accurate two-handed bending up to 180° of soft copper, aluminium, soft steel and brass pipe. Also suitable for bending very short pipes.

7228

Nominal dimension mm

Order No. 0095 0100

Radius r mm

Length mm

12 15

96.45

36 54

390 450

115.95 (W592)

Tube benders

Design: Compact, torsion-resistant construction. Bending radius display with scale division 45°; 90°; 135° and 180° in 15° increments, 3 pipe sizes with tight radii can be bent with one device. Application: Refrigeration and air-conditioning technology, oil supply, automotive, hydraulics and compressed air technology, for precise two-handed bending of soft steel, brass and copper pipes up to 180°.

7228

For pipe ∅ mm

Order No. 0110

6; 8; 10

66.95 (W592)

Single-hand pipe bender, with ratchet feed

Design: With mechanical ratchet feed and ergonomic handle. Bending segments can be easily changed with the bayonet lock. Application: For accurate one-handed bending of soft copper and aluminium pipes, soft, coated copper pipe as well as soft precision steel up to 90°. For the production of U-bends, counter-bends, swan-neck bends and connecting bends at all levels. Supplied: Plastic case, basic device, backing plate, backing segment and 4 bending segments.

7224

For pipe ∅ mm 6; 8; 10; 12

Order No. 0111

259.95 (W591)

Hand Tools 7

Hand pipe bender

Design: Made of hardened steel. Stable design and pressure, high-sliding bending elements and sliding pieces made of high-strength, fibre-reinforced polyamide. Application: For cold bending by hand or stationary in parallel vice up to 180° of e.g.: Hard, semi-hard, soft copper pipes (also thin-walled) ∅ 10–22 mm Soft, coated copper pipes (also thin-walled) ∅ 10–18 mm Stainless steel pipes of the press-fitting systems ∅ 12–18 mm C-steel pipes of Pressfitting systems (also coated up to ∅ 18 mm) ∅ 12–22 mm Soft precision pipes ∅ 10–20 mm Electrical installation pipes DIN EN 50086 ∅ 16–20 mm Multilayer composite pipes ∅ 14–32 mm Supplied: Bending drive, locking pins, bending segments with sliding block, bending spray and steel case.

7249

For pipe ∅ mm

Order No. 0010

12; 15; 18; 22

496.00 (W621)

7/40