html - Catalog FORMAT plus - 2017 - 2018

Cup wheels/diamond cutting discs 1365

Spanner flange set for thin detachable cutting disc

Design: Made of high quality tool steel, for drive spindles M14. Application: Increases lateral stability and ensures precise cutting disc guidance, especially for straight, thin cutting discs with ∅ 178/180 and 230 mm.

8110

Outer ∅ mm

Order No. 0010

76

33.10 (W835)

Cup wheel

SG-ELASTIC Design: Semi-hard design, with resin bond for long life and grinding performance. Standard bore 22.23 mm. Application: For all angle grinders with max. 50 m/s peripheral speed.

8126

Aluminium oxide (A16), For steel and cast work. Not made with iron, sulphur and chlorine fillers. Suitable for surface machining and with a slight angle for machining weld seams.

8129

Silicon carbide (C16), for stone and natural stone work in wet and dry grinding and cast iron work.

8126

8129

Plastic FRP wood

Aluminium

Steel

Carbide

INOX

Cast

Stone

Paint

Order No.

8126 8129

C

V C

C

8129

8126

Largest ∅ mm

Order No. 0110

Smallest ∅ mm

Cup height mm

Wall thickness mm

Max. rpm min -1

110

12.37 (W840)

13.12 (W840)

90

55

20

8600

m

DT 500 AC ACCU Design: With turbo tooth system for clean and breakout-free edges, with closed cutting edge. Segment height 10 mm. Application: For cutting concrete and building site materials. Note : Detailed information about battery-powered tools is found on page 8/67. Diamond cutting disc for battery-powered devices

Abrasives 8

8804

∅ mm 115 125

Order No. 0115 0125

Segment width mm

Hole ∅ mm 22.23 22.23

10.05 11.20 (W850)

1.9 1.9

8/17

Articles marked ◊ are not held in stock, procurement is effected at short notice.