html - Catalog FORMAT plus - 2017 - 2018

Rubber bodies/abrasive bands 1404

Application tip for abrasive caps • When removing and refitting the abrasive cap a slight right turn should be made. • Changing is easier when the abrasive cap is clamped in the drive machine.

• Abrasive caps perform best at cutting speeds of 10–20 m/s. • The maximum peripheral speed is 25 m/s. • The specified maximum speed should not be exceeded for safety reasons.

m

POLIROLL ® grinding roll

Design: Resin-bonded aluminium oxide grain (A) on a spiral-shaped wound fabric carrier. Fresh grain is used in successive layers as the outer coated abrasive wears off. With very good machining performance. Always grind with the tip and not the surface, otherwise the bond can become damaged by the heat. Application: For steel and casting. For processing drill holes, fillet weld seams and deburring work on cast parts.

8410

8411

∅ x height

Order No.

PU

mm

K 80 0.81 1.05 1.23

K 150

0635 0935 1235

6 x 35 9 x 35 12 x 35

0.81 1.05 1.23

50 50 50

(W849)

(W849)

m

POLIROLL ® grinding roll holder

Application: For mounting spiral-shaped wound grinding rolls. The conical self-clamping holds the grinding rolls in place during working.

8410

Shaft ∅ mm

Order No. 0005

6

9.50 (W849)

POLICAP ® abrasive cap holder

Design: Slotted rubber bodies with 3 mm or 6 mm shaft. When removing and refitting the abrasive cap a slight right turn should be made. Changing is easier when the abrasive cap is clamped in the drive machine. Abrasive caps perform best at cutting speeds of 10–20 m/s.

Application: To accommodate moulded, seamless abrasive caps. Centrifugal force holds the caps in place during working. Note: The maximum peripheral speed is 25 m/s. The specified maximum speed should not be exceeded for safety reasons.

8340 0510 8340 1015 8343 0713

8340 0712 8343 0511 8343 1015

Maximum rpm 95000 min -1

Maximum rpm 65000 min -1

Maximum rpm 45000 min -1

Maximum rpm 95000 min -1

Maximum rpm 65000 min -1

Maximum rpm 45000 min -1

8346 0511

8346 0713

Maximum rpm 95000 min -1

Maximum rpm 65000 min -1

Abrasives 8

8349 0515

8349 1125

Maximum rpm 95000 min -1

Maximum rpm 40000 min -1

8340

8340

8340

8343

8343

8343

8346

8346

8349

8349

Shaft ∅

Order No.

PU

Shape A 5 x 10

Shape A 7 x 12

Shape A 10 x 15

Shape C 5 x 11

Shape C 7 x 13

Shape C 10 x 15

Shape G 5 x 11

Shape G 7 x 13

Shape L 5 x 15

Shape L 11 x 25

mm

0510 0511 1015 0712 0713 0515 1125

3 4.46

– – – – – –

– –

–

– – – –

– –

–

– – – –

– – – – –

– – – – – –

5 5 5 5 5 5 5

3 3 3 3 6 6

– – – – – –

4.46

4.39

4.89

– – – – –

4.89

– – – – –

4.81

– – – –

– – – –

4.81

4.81

– –

– –

5.95

–

6.15

(W849)

(W849)

(W849)

(W849)

(W849)

(W849)

(W849)

(W849)

(W849)

(W849)

8/56