html - Catalog FORMAT plus - 2017 - 2018

Clamping elements 673

Loose slot nut

Design: DIN 6323, case-hardened and ground. Material: Steel C 15.

DIN 6323

Application: The slot nuts are inserted from the side following rough alignment. No slot nuts protruding on the bottom will disturb while transporting the jig and the machine table cannot be damaged.

3905

Nominal dimension of slots for machines b mm

Order No.

Nominal dimension of slots for device mm

h

H 1

l

mm

mm

mm

5010 5020 5025 5030 5040 5050 5060 5070 5080 5090

10 12 12 14 16 18 20 22 24 28

17.80 14.80 26.40 25.70 25.70 25.70 25.50 37.30 44.10 46.30 (W342)

12 12 20 20 20 20 20 20 20 20

12

3.6 20

28.6 5.5 20

14 14 14 14

5.5 32 5.5 32 5.5 32 5.5 32

45.5 7 50.5 7 55.5 7 61.5 7

32 40 40 40

Systems

Clamping

3

Hexagon nut

Design: DIN 6330B. Height 1.5 d. One end is spherical for conical seats DIN 6319D or G; the other end is flat for washers DIN 6340. Material: Tempered steel to strength grade 10.

DIN 6330-B

3906

Thread

Order No. 0005 0010 0020 0030 0040 0050 0060 0070 0080 0090 0100 0110 0120 0130

Hexagon square width across flats mm

Dimension e mm

Height m mm

Height r mm

M6 M8

0.31 0.31 0.50 0.50 0.56 0.56 0.81 0.81 0.96 1.72 1.74 3.16 2.89 2.44

10 13 16 17 18 19 21 22 24 27 30 32 34 36

11.05 14.4 17.8 18.9 21.1 23.4 24.5 26.8 30.1 33.5 35.7 37.7 20.03

9

9

12 15 15 18 18 21 21 24 27 30 33 33 36

12 15 15 17 17 20 20 22 24 27 30 30 32

M10 M10* M12 M12* M14 M14* M16 M18 M20 M22* M22 M24

40

* Old DIN standard.

(W340)

Hexagon nut with collar

Design: DIN 6331. Height 1.5 d. Forged and tempered. One end with collar so no need for washers if the size of the bore or the clamping slot allows. Material: Tempered steel to strength grade 10.

DIN 6331

3986

Thread 3907

Order No.

Hexagon square width across flats mm

Dimension e mm

Height m mm

Height a mm

Collar ∅ mm

0200 0205 0210 0215 0220 0225 0230

M8 0.54 0.53 M10 0.72 0.70 M12 0.78 0.76 M16 1.42 1.48 M18 2.13 2.49 M20 2.26 2.64 M24 3.40 3.99

13 16 18 24 27 30 36

14.4 17.8

12 3.5 18

15 4 18 4 24 5 27 5 30 6 36 6

22 25 31 34 37 45

20.03

26.8 30.1 33.5

40

(W340)

(W342)

3/151

Articles marked ◊ are not held in stock, procurement is effected at short notice.