html - Catalog FORMAT plus - 2017 - 2018

Clamping elements 681

Draw-down clamping claw with eccentric screw

Design: With tempered T-slot nut and hardened clamp disc. Application: The clamping screw can be rotated so that processed workpieces can be clamped without damage using the smooth side. In addition, sawn parts, forged parts or cast parts can be clamped using the serrated edge. The workpiece is pressed against the base support by the draw-down effect. The clamp disc adapts to the workpiece angular position, thus also non-rectangular workpieces can be clamped.

Systems

Clamping

3

3917

Slot width mm

Order No. 0140 0150 0160 0170

Dimension A mm

Dimension B mm

Dimension C mm

Dimension D mm

Eccentric travel mm

Clamping force kN

14 16 18

67.10 67.10 72.90 58.70 (W343)

50 50 50 50

28.4 28.4 28.4 28.4

16 16 16 16

25.5 25.5 25.5 25.5

2 2 2 2

18 18 18 18

without slot nut

Double wedge clamp

Design: aluminium profile coated, steel wedge tempered. Multiple clamping is enabled thanks to compact dimensions. Application: 2 workpieces are simultaneously clamped by one clamping element Ideal for clamping round and rectangular workpieces.

3917

Width B mm

Order No.

PU

Max. spreading mm

Height H mm

Length L mm

Size B1 mm 5.3 7.9 10.4 16.1 20.8 30.8 41.2

Size B2 mm 6.1 9.1 12.3 18.6 24.8 37.3 49.7

Dimension H2 mm

Screw

A/F

Clamping force kN

0180 0190 0200 0210 0220 0230 0240

6.1 9.1 12.3 18.6 24.8 37.3 49.7

16.55 16.55 12.20 16.90 20.10 88.40

6 6 8 6 4 2 2

6.7

6.9 9.7 14.5 25.9 38.6 51.5 19

8.1 11.9 15.9 23.8 31.7 47.6 63.5

3.6 4.7 5.6 9.5 12.7

M2 1.5 M2.5 2 M4 3 M6 5 M8 6 M12 10 M16 14

0.9 1.3 2.2 6.7 8.9

10

13.2 20.3 26.9 39.9

19

15.6 26.7

134.50 (W343)

53

25.4

3/159

Articles marked ◊ are not held in stock, procurement is effected at short notice.