html - Catalog FORMAT plus - 2017 - 2018

Vacuum clamping device 709

Design: Adapter plate made of aluminium. Application: The sealing cord is inserted into the raster of the rubber adapter mat. Go up to the end of the area to be machined in the workpiece. Next, the adapter plate is screwed down to the vacuum clamping plate. The workpiece to be machined is placed on it and fixed using the adjustable eccentric stops. Benefits: • The adapter plate can be overcut by up to 2 mm (elimination of cuts) • Preferred areas of application include the processing of thin sheets, foils, boards and even paper Adapter plate

3967

Dimensions L x W mm

Order No. 0030 0035 0040 0045 0050

Materialdicke ±0.1 mm

Weight kg

150 x 150 300 x 200 300 x 400 400 x 400 600 x 400

305.50 ◊ 482.50 ◊ 642.50 ◊ 475.00 ◊ 684.00 ◊

10 10 10 10 10

0.6 1.6 3.3 4.4 6.6

(W342)

Systems

Clamping

3

Surface-mounted block

Design: The surface-mounted block has grooves and a suction point on its upper side. The field size is individually defined by inserting the sealing cord. The surface-mounted block is placed directly over a suction point on the vacuum clamping plate. The underside has a sealing cord of 2.0 mm ∅ Application: Deployment of surface-mounted blocks allows openings for machining. Workpieces can be drilled through without the vacuum clamping plate or the component itself being damaged. Note: Please order sealing cord ∅ 4.0 mm separately.

3967

Max. vacuum %

Order No. 0055

No. of sucti- on points

Dimensions L x W x H mm

Weight g

93

344.00 ◊

1

78 x 78 x 40

600

(W342)

Design: Adapter mat, rubber. Application: Suitable for surface-mounted block (Order No. 3967 0055). Benefits: • The good coefficient of friction offers very good resistance to displacement forces arising during processing • The adapter mat can be cut into up to 2 mm deep without problem • When always using with the same contours, the adapter mat can often be reused as there will be no wear Adapter mat

3967

Dimensions L x W mm

Order No. 0060

Materialdicke ±0.2 mm

Weight g

78 x 78

3.81 ◊

4

60

(W342)

Design: Adapter plate made of aluminium. Application: Suitable for surface-mounted block (Order No. 3967 0055). Benefits: • The adapter plate can be overcut by up to 2 mm (elimination of cuts) • Preferred areas of application include the processing of thin sheets, foils, boards and even paper Adapter plate

3967

Dimensions L x W mm

Order No. 0065

Materialdicke ±0.1 mm

Weight g

78 x 78

77.30 ◊

10

200

(W342)

3/187

Articles marked ◊ are not held in stock, procurement is effected at short notice.