html - Catalog FORMAT plus - 2017 - 2018

Cable shears 924

VDE cable shears KT 8

Design: Handy, small shape. Made of steel, forged. Polished head. Blades with two sharpened grooves for cutting thin or thick single- and two-core cables. Handles with multi-component plastic covers, insulated up to 1000 V according to IEC 60900, DIN EN 60900, VDE 0682/Part 201. Application: For squash-free cutting of copper and aluminium cables. Note: Not suitable for steel wire, steel-reinforced cable, aluminium alloys and hard-drawn copper conductors.

5386

Cutting values ∅ mm

Order No. 0165 0200

Cutting values mm 2

Length mm

8

35.70

16 25

165 215

12

40.00 m

(W523)

Cable shears

Design: Made of chrome-vanadium electric steel, oil hardened and tempered. With hardened, precision-cut blades, cuts smoothly and cleanly without squashing. With clamping protection and adjustable screwed hinge. Application: For single- and multi-wire copper and aluminium cables. Note: Not suitable for steel wire or wire cable.

5392

Burnished head. Low effort due to good leverage and special cutting edge geometry. Arms made of high- strength aluminium pipe. Handles with multi-component plastic covers.

5392

5396

Polished head. Favourable transmission ratios due to toggle. Arms made of steel pipe. Plastic-covered handles.

Hand Tools 5

5396

5397

Polished head. Favourable transmission ratios due to toggle. Arms made of steel pipe. Plastic-coated handles, insulated up to 1000 V, according to IEC 60900, DIN EN 60900, VDE 0682/Part 201.

5397

5396

5397

5392

Cutting values ∅ mm

Order No. 0501 0600

Cutting values mm 2

Length mm

27 27

94.20

–

–

150 150

500 600

–

166.00 (W525)

191.00 (W525)

(W525)

Cable sheers with telescopic arms

Design: Blade head made of special grade tool steel (interchangeable), hardened and tempered in oil. Burnished head. With clamping protection and adjustable screwed hinge. Easy and clean cut due to the new blade shape, less effort required due to optimum transmission. Arms made of high-strength aluminium oval pipe, arm length adjustable . The articulated joint has different settings to allow for working in narrow spaces and to optimise the lever arm in the case of fully pulled-out arms. Handles with multi-component plastic covers.

Application: For single- and multi-wire copper and aluminium cables. Note: Not suitable for steel wire, hard-drawn copper conductors or steel wire.

5394

Cutting values ∅ mm

Order No. 0560

Cutting values mm 2

Length mm

38

205.50

280

550–770

(W525)

5/50