html - Catalog FORMAT plus - 2017 - 2018

Wire-stripping pliers 933

m

Stripping pliers

Design: DIN ISO 5746. Made of vanadium electric steel, forged, hardened and tempered in oil. Chrome-plated head, with angled cable mantle cutter, stripping holes and wire cutter. Blades additionally inductively hardened (61 HRC). Handles with multi-component plastic covers, with recessed grips and indented lettering, insulated up to 1000 V in line with IEC 60900, DIN EN 60900, VDE 0682/Part 201. Application: For stripping of round and wet-room cables (e.g. NYM cables), particularly suited for low-laying cables due to slender head.

5376

Length

Order No.

Cutting values ∅ medium-hard/hard wire mm

Conductor cross-section

mm 165

0165

36.60 (W525)

3.2/2.2

8-13 ∅ mm/1.5 + 2.5 mm 2

Abisolierzange Wire-stripping pliers

Design: Made of special tool steel, hardened and tempered in oil. Simple adjustment to the wire or cord ∅ (max. ∅ 5 mm or 10 mm 2 ) using the knurled screw and counter nut. With opening spring. Plastic-covered handles. Application: For the stripping of single-strand, multi-strand and finely stranded conductors with plastic or rubber insulation.

5449

5454

5449

Length mm

Order No. 0160

160

11.65 (W512)

14.30 (W525)

5454

Wire-stripping pliers

Design: Made of special tool steel, hardened and tempered in oil. Simple adjustment to the wire or cord ∅ (max. ∅ 5 mm or 10 mm 2 ) using the knurled screw and counter nut. With opening spring. Handles with multi-component plastic covers. Application: For the stripping of single-strand, multi-strand and finely stranded conductors with plastic or rubber insulation.

Hand Tools 5

5452

5455

5452

Length mm

Order No. 0160

160

13.15 (W512)

17.25 (W525)

5455

Wire-stripping pliers

Design: Made of special tool steel, hardened and tempered in oil. Simple adjustment to the wire or cord ∅ (max. ∅ 5 mm or 10 mm 2 ) using the knurled screw and counter nut. With opening spring. Handles with multi-component plastic covers. Application: For the stripping of single-strand, multi-strand and finely stranded conductors with plastic or rubber insulation.

5450

5456

5450

Length mm

Order No. 0160

160

15.30 (W512)

19.95 (W525)

5456

VDE wire-stripping pliers

Design: Made of special tool steel, hardened and tempered in oil, chrome-plated head. Simple adjustment to the wire or cord ∅ (max. ∅ 5 mm or 10 mm 2 ) using the knurled screw and counter nut. With opening spring. Handles with multi-component plastic covers, insulated up to 1000 V in line with IEC 60900, DIN EN 60900, VDE 0682/Part 201. Application: For the stripping of single-strand, multi-strand and finely stranded conductors with plastic or rubber insulation.

5459

5453

Length mm

Order No. 0160

5453

160

17.50 (W512)

22.80 (W525)

5459

5/59

Articles marked ◊ are not held in stock, procurement is effected at short notice.