Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Workshop files 1196

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

General information: An appropriate steel microstructure, essential for uniform hardness. Type and angle of the cut are determined by the particular application, whereby one differentiates between

cut 1 - for rough machining, cut 2 - half smooth/universal and cut 3 - finishing. Ideal tooth geometry for each application. The length of the file is measured without the tang from the tip to the attachment.

Flat blunt file

Design: DIN 7261, Form A, rectangular and hewn on 3 sides. Application: Suitable for processing rectangular geometries and deburring. Can also be used for surface machining.

6530

6530 6533

With tang

With ergonomic shaped 2-component plastic handle, roll-off protection and hanging hole.

6533

6533

6533

6530

6530

Length mm

Length mm

Order No. 0101 0102 0103 0151 0152 0153 0201 0202 0203

Cut Cross-section mm 1 12 x 2.5 2 12 x 2.5 3 12 x 2.5 1 16 x 4.0 2 16 x 4.0 3 16 x 4.0 1 20 x 5.0 2 20 x 5.0 3 20 x 5.0

Order No. 0251 0252 0253 0301 0302 0303 0351 0352 0353

Cut Cross-section mm 1 25 x 6.0 2 25 x 6.0 3 25 x 6.0 1 30 x 6.5 2 30 x 6.5 3 30 x 6.5 1 35 x 7.5 2 35 x 7.5 3 35 x 7.5

100 100 100 150 150 150 200 200 200

2.30 2.42 2.46 2.48 2.54 2.70 2.96 3.16 3.32

– – –

250 250 250 300 300 300 350 350 350

4.02 4.18 4.62 5.35 5.70 6.10 7.40 7.70 8.10

7.05 7.30 7.85

4.60 4.66 4.88 5.65 5.90 6.10

– – – – – –

(W548)

(W551)

(W548)

(W551)

Flat pointed file

Design: DIN 7261, Form B , rectangular, tapering point and hewn on 4 sides. With ergonomic shaped 2-component plastic handle, roll-off protection and hanging hole. Application: Suitable for processing rectangular geometries, deburring as well as filing perforations. Can also be used for surface machining.

6535

6535

Length mm

Length mm

Order No. 0201 0202 0205

Cut

Cross-section mm

Order No. 0251 0252 0253

Cut

Cross-section mm

Hand Tools 6

200 200 200

5.80 5.90 6.15

1 2 3

20 x 5 20 x 5 20 x 5

250 250 250

6.85 7.00 7.40

1 2 3

25 x 6 25 x 6 25 x 6

(W551)

(W551)

Three edge file

Design: DIN 7261, Form C , triangular, tapering point and hewn on 3 sides. Application: Suitable for deburring as well as filing perforations. Can also be used for surface machining.

6542

6542 6545

With tang.

With ergonomic shaped 2-component plastic handle, roll-off protection and hanging hole.

6545

6545

6545

6542

6542

Length mm

Length mm

Order No. 0101 0102 0103 0151 0152 0153 0201 0202

Cut Cross-section mm

Order No. 0203 0251 0252 0253 0301 0302 0303

Cut Cross-section mm

100 100 100 150 150 150 200 200

2.74 2.96 3.22 3.22 3.34 3.46 3.92 4.02

– – –

1 2 3 1 2 3 1 2

8.0 8.0 8.0 11.0 11.0 11.0 15.0 15.0

200 250 250 250 300 300 300

4.24 5.50 5.80 6.40 8.05 8.30 8.60

7.35

3 1 2 3 1 2 3

15.0 17.5 17.5 17.5 20.0 20.0 20.0

– – – – – –

5.60 5.75 5.90 6.90 7.05

(W548)

(W551)

(W548)

(W551)

6/176