Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Drilling tools 120

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

m

Core drills

Design: HSS-Co, AlTiN coated surface, with Weldon shank ∅ 19 mm, 2 carrier surfaces and 1 countersink for Rota-Quick ® . Inner hole 6.35 mm. Application: For use in magnetic base drills and column drills with MK mount. The core drill only machines a thin material ring. The remaining drill core is ejected by a guide and ejector pin using spring force. The chips are quickly moved up for disposal and the risk of breakage minimised. Even large drilling diameters require relatively low amounts of energy. The core drill machines only a small part of the overall area in comparison to the spiral drill. This results in huge savings in power and time.

Cutting Tools 1

HSS Co

1340

bright

HSS

1341

TiAlN

HSS Co

1342

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1340 1341 1342

30 30 28

20 20 18

40 40 38

42 42 40

6

13

10

4

20

1341

1342

1341

1342

1340

1340

Drill ∅

Drill ∅

Order No.

Order No.

mm

mm

bright

TiAlN

TiAlN

bright

TiAlN

TiAlN

1255 1355 1455 1555 1655 1755 1855 1955 2055 2155 2255 2355 2455 2555 2655 2755 2855 2955 3055 3155

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

24.30 25.40 26.20 28.10 30.00 31.80 33.70 35.60 37.50 39.30 41.20 43.10 45.00 46.80 48.70 50.60 52.40 54.30 56.10 58.00 (W123)

21.40 22.30 23.10 24.70 26.40 28.00 29.70 31.30 33.00 34.60 36.20 37.90 39.60 41.20 42.80 44.50 46.10 47.80 49.40 51.10 (W123)

26.40 27.60 28.50 30.60 32.60 34.60 36.70 38.70 40.70 42.80 44.80 46.80 48.90 50.90 52.90 55.00 57.00 59.00 61.00 63.10 (W123)

3255 3355 3455 3555 3655 3755 3855 3955 4055 4155 4255 4355 4455 4555 4655 4755 4855 4955 5055

32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

59.90 61.70 63.60 65.60 70.00 72.10 74.00 75.90 77.90 79.80 81.70 83.60 85.40 85.80 89.60 91.50 93.40 95.30 97.20 (W123)

52.70 54.30 56.00 57.70 61.60 63.40 65.10 66.80 68.50 70.20 71.90 73.50 75.20 75.50 78.90 80.50 82.20 83.90 85.60 (W123)

65.10 67.10 69.20 71.30 76.10 78.30 80.40 82.50 84.60 86.70 88.80 90.80 92.90 93.30 97.40 99.50

101.50 103.50 105.50 (W123)

1/102

Made with FlippingBook Online document