Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Diamond files 1207

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Higher pressure does not achieve a better file outcome, but damages the file.

General notes: Due to the abrasive coating, high grip, material removal rate and profile/edge stability are achieved under light pressure. Diamond files are also suitable for very hard surfaces, plastics, hardened steel, hard metals, glass, ceramics, non-ferrous metals, super nickel alloys, armouring and ferrite.

Diamond needle file

Design: Galvanic bound in hard-chrome-plated precision design. Total length 140 mm, diamond facing length 70 mm, shaft ∅ 3 mm. Original Swiss basic body made of ground and forged special file steel. Universal granulation size D 126 medium (according to the FEPA standard). Application: For precise (re) processing workpieces/tools (e.g., punching, cutting and pressing tools) in machine and mould. In addition, for deburring and processing of GFK and related materials, of HM and ceramics prior to and after sintering, graphite, ferrite, cast HSS etc.

Triangular

Square

Semi-round

Flat blunt

Round

Flat blunt, round edges

Barette

Flat point

6657

6655

Shape

Order No. 0005 0010 0015 0020 0025 0030 0035 0055

Dimension mm

Total length mm

Diamond trim length mm

Shaft ∅ mm

6655

6657

Flat blunt

13.80 13.80 13.80 13.80 12.25 12.25 12.25 12.25 (W550)

17.40 17.40 17.40 17.40 17.40 17.40 17.40 17.40 (W559)

5.2 x 1.6 5.5 x 1.6 5.2 x 1.6 5.5 x 1.6 5.2 x 1.6 5.5 x 1.6

140 140 140 140 140 140 140 140

70 70 70 70 70 70 70 70

3 3 3 3 3 3 3 3

flat blunt, round edges

Flat point Triangular

3.7 2.6

3.5

Square

2.6 x 2.6

Semi-round

5.4 x 2.0 5.5 x 1.6

Round Barette

3.2

3.2

4.9 x 1.8 5.0 x 2.0

Hand Tools 6

Diamond needle file

Design: With universal granulation size D 126 medium (according to the FEPA standard). Supplied in plastic roll-up case incl. diamond needle file (Order no. 6655).

6665

6660

Design

Order No. 0140

Set contents

6-part

66.60

–

1 flat blunt 1 triangular 1 square 1 semi round

1 round 1 flat tip

0140

10-part

–

115.50

1 flat blunt 1 triangular 1 square 1 semi round

6660

1 round 1 flat tip

1 knife profile 1 sword profile 1 bird tongue 1 barrette

(W550)

(W550)

6665

6/187

Articles marked ◊ are not held in stock, procurement is effected at short notice.