Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Extractor 1243

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Counter part for recessed extractor

Design: Sturdy counter support with T-handle and single extraction hook. Delivery of 22-1 and 22-2 with screwed-in reducer and 22-3 with connection nut and screwed-in reducer. 22-1 For recessed extractors 21-0 and 21-02, with reducer For recessed extractors 21-1 and 21-5, without reducer.

22-2

For recessed extractors 21-3 and 21-5, with reducer. For recessed extractors 21-6 and 21-8, without reducer.

22-3 For recessed extractor 21-6 and 21-8, with reducer via connecting nut. For recessed extractor 21-9, without reducer via connecting nut. Application: For use with an recessed extractor (Order No. 6922). For connecting to the recessed extractor, the spindle of the support brace is screwed into the clamping nut of the recessed extractor.

6923

Model

Order No. 0001 0002 0003

For recessed puller model

22-1 22-2 22-3

44.30 61.50

21-0 – 21-5 21-3 – 21-8 21-6 – 21-9

122.00 (W562)

Universal extractor set

Design: Supplied in L-Boxx, with constantly visible instructions on the lid. Application: For recessed, external and bearing pulling of ∅ 8-48 mm.

6896

Design

Order No. 0005

Model Set contents

21-part 662.00

27-A 1 two-armed puller 43-01

1 Extractor single-armed with lateral clamping device 204-01 1 Ball bearing extractor 69-A1, suitable for bearings: 6004; 6005; 6006; 6201; 6202; 6203 1 Ball bearing extractor 69-A2, suitable for bearings: 6008; 6009; 6204; 6205; 6300; 6301; 6302 1 Ball bearing extractor 69-A3, suitable for bearings: 6010; 6206; 6303; 6304 1 recessed extractor 21-01-E for bearings ∅: 9–12 mm 1 recessed extractor 21-1-E for bearings ∅: 12–16 mm 1 recessed extractor 21-2-E for bearings ∅: 14–19 mm 1 recessed extractor 21-3-E for bearings ∅: 18–23 mm 1 recessed extractor 21-4-E for bearings ∅: 24–34 mm 1 recessed extractor 21-5-E for bearings ∅: 34–48 mm 10 Slide hammers with adapter 22-01–G27-A:

Hand Tools 6

M3; M4; M5; M6; M8; M10; M12 and galvanised: M10; M12; 15–16G

(W562)

Ball bearing puller and extractor set

Design: Supplied in L-Boxx or metal case, with operating instructions always visible on the lid. Application: For extracting ball bearings, bearings, gears, shoulder bearing inner rings, deep groove ball bearings as well as extracting tight-fitting ball bearings, bearing outer rings and sleeves.

6926

Design

Order No. 0046

Model

Set contents

11-part in L-Boxx

661.00

24-A 6 recessed pullers (12–46 mm) 21-1 to 21-6 2 counter supports 22-1; 22-2

1 removal chuck for groove ball bearing inner rings 23 1 double-armed battery clamp remover 43-1 1 two-armed puller 20-1

0070

14-part in L-Boxx

970.50

24-B 8 recessed pullers (12–70 mm) 21-1 to 21-8 2 counter supports 22-1; 22-2

1 removal chuck for groove ball bearing inner rings 23 1 double-armed battery clamp remover 43-1 2 two-armed pullers 20-1; 20-2

(W562)

Continued on next page

6/223

Articles marked ◊ are not held in stock, procurement is effected at short notice.