Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Hand wire brushes/honing brushes 1263

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Copper tube brush

Design: Double wire core with crimped steel wire and stable plastic handle. Application: To quickly clean the inside of pipes and soldering joints.

7013

7013

Brush ∅ mm

Brush ∅ mm

Order No. 0013 0016 0019

Working length mm

Total length mm

Order No. 0023 0029

Working length mm

Total length mm

13 16 19

5.95 6.05 6.40

25 25 28

160 160 160

23 29

6.70 7.05

25 32

160 160

(W566)

(W566)

Tube brush

Design: Double wire core with crimped steel wire and wooden handle.

Application: To remove chippings and loose particles from pipes as well as for cleaning the inside of holes in steel, wood and plastic.

7014

Brush ∅ mm

Order No. 0015 0020 0025

Working length mm

Total length mm

15 20 25

7.40 7.50 7.80

100 100 100

280 280 280

(W566)

Design: Double wire core and loop. Trim 100 mm, overall length 300 mm. Application: Ideal for cleaning, dust removal, deburring, paint removal in nozzles, glass bottles, tubes, pipes, etc. Tube brush 7017 Steel wire, crimped 7019 Brass wire, crimped 7021 Nylon, smooth.

7017

7019

7021

7017

7019

7021

7017

7019

7021

Brush ∅ mm

Brush ∅ mm

Order No. 0005 0010 0015 0020 0025

Order No. 0030 0035 0040 0045 0050

4 5 6 8

6.00 6.05 6.15 4.53 4.58

– –

1.97 2.00 2.09 2.16 2.16

12 15 18 20 25

4.62 4.73 4.86 4.91 4.95

5.85 6.00 6.15 6.25 6.35

2.19 2.23 2.33 2.35 2.40

6.20 6.20 5.85

10

(W566)

(W566)

(W566)

(W566)

(W566)

(W566)

Honing brush

Design: Robust, self-centring honing tool with silicon carbide fill for a gentle grinding process. The abrasive spheres adapt to the surface with the flexible brush construction. Overall length 200 mm. Application: For final finishing of surfaces an bores. Also for edge breaking and processing non-round drill holes. For the generation of fine-ground surfaces with a high contact ratio for any potential oil-film adhesion. Simple handling on handheld drills, honing machines and automatic machines.

Hand Tools 7

7035

7037

7035

7037

Brush ∅

Brush ∅

Order No.

Order No.

Tool ∅

Tool ∅

Effective working width mm

Shaft ∅

Effective working width mm

Shaft ∅

K 120

K 180

K 120

K 180

mm

mm

mm 9.0 10.0 11.0 12.0 13.0 15.5 18.0 20.0 22.0 25.0 27.0 28.0

mm

mm

mm

0008 0009 0010 0011 0012 0014 0016 0018 0020 0022 0024 0025

8 19.20 19.20 9 19.90 19.90 10 20.30 20.30 11 20.50 20.50 12 21.20 21.20 14 21.60 21.60 16 22.80 22.80 18 23.00 23.00 20 23.20 23.20 22 24.30 24.30 24 25.50 25.50 25 26.00 26.00

50 3.6 50 3.6 60 3.6 60 3.6 60 3.6 60 3.6 60 4.6 60 4.6 70 4.6 70 4.6 70 5.1 70 5.1

0027 0029 0032 0035 0038 0041 0045 0048 0051 0054 0057 0060

27 26.90 26.90 29 27.60 27.60 32 29.10 29.10 35 30.60 30.60 38 31.80 31.80 41 33.40 33.40 45 34.70 34.70 48 36.30 36.30 51 37.40 37.40 54 37.60 37.60 57 38.40 38.40 60 38.80 38.80

30.0 32.0 35.0 38.0 41.0 45.0 48.0 51.0 54.0 57.0 60.0 64.0

70 5.1 70 5.1 70 5.1 70 5.7 70 5.7 70 5.7 70 5.7 70 6.5 70 6.5 70 6.5 70 7.3 70 7.3

(W702)

(W702)

(W702)

(W702)

7/3

Articles marked ◊ are not held in stock, procurement is effected at short notice.