Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Countersink tools 133

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase. 90° "ADVANCED LINE®" countersinks and deburring countersinks with Rotastop-shank®

Design: Similar to DIN 335-C. New, innovative taper-ground process. Optimised machining geometry resulting in up to 50% longer tool life. Rotastop-shank® for good torque transmission, no spinning in the drill chuck. With straight, u-shaped clamping slots and drilling spaces ground from full pieces. Also provided with cutting and clearance angles for the most common materials. Application: Suitable for universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965 and DIN 966 in one step. Please note the large countersink range! The excellent cutting properties and easy machining process result from the cone-shaped back taper on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Note: Sufficient supply of coolant is essential for uncoated designs.

Z 3

Factory standard

90°

Cutting Tools 1

HSS

1431(HSS)

HSS-E

blank

HSS

1435

TiN

HSS-E

HSS

m 1432

1438

TiN

Rotastop-shank®

TiAIN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1431 1435 1438 1439 1432

C C C C C

C C C C C

V V V C C

V V C C

C C C C C

C C V C

V C C

C C

C C

C C

V C

1431

1435

1438

1439

1432

Nominal ∅

Order No.

Total length

Shank ∅

Smallest ∅

Bright HSS 11.40 12.75 15.30 16.55 18.75 19.80 28.30 29.00 35.00 40.00 53.90 (W135)

TiN HSS

TiAlN HSS 17.30 19.35 23.40 25.30 28.40 30.60 42.90 44.00 53.20 60.20 81.10 (W135)

Bright HSS-E 14.05 15.30 18.90 20.50 23.10 24.40 34.90 35.70 43.30 49.40 66.50 (W135)

TiN HSS

mm

mm 1.5 2.0 2.5 2.8 3.2 3.2 3.5 3.5 3.8 3.8 4.2

mm

mm

0630 0830 1040 1240 1500 1650 1900 2050 2300 2500 3100

6.3 8.3

16.30 18.25 21.90 23.60 26.70 28.40 40.50 41.50 50.20 57.30 77.20 (W135)

17.95 19.20 23.20 25.60 28.60 31.60 44.00 44.90 55.10 61.50 81.90 (W135)

45 50 50 56 60 60 63 63 67 67 71

5 6 6 8

10.4 12.4 15.0 16.5 19.0 20.5 23.0 25.0 31.0

10 10 10 10 10 10 12

90° "ADVANCED LINE®" countersinks and deburring countersinks with Rotastop-shank®

Design: Supplied in a robust, high quality plastic cassette with automatic countersink setup function when opened.

1440 1442 1444 1439 1432

HSS, bright surface Set consisting of (order no. 1431). HSS, TiN coated surface Set consisting of (order no. 1435). HSS, TiAIN coated surface Set consisting of (order no. 1438). HSS-E, bright surface Set consisting of (order no. 1439). HSS, TiN coated surface Set consisting of (order no. 1435).

1432

1442

TiN

TiN

TiN

1440 + 1439 bright

1444 TiAlN

m

1440

1442

1444

1439

1432

Set contents

Order No.

mm

bright

TiN

TiAlN

bright

TiN

0050 0055 0050 0055

6.3; 10.4; 16.5; 20.5; 25.0 6.3; 10.4; 16.5; 20.5; 25.0 6.3; 8.3; 10.4; 12.4; 16.5; 20.5 6.3; 8.3; 10.4; 12.4; 16.5; 20.5

120.50

156.00

169.00

–

–

– –

– –

– –

120.00 126.00

164.00 166.50

115.00 (W135)

148.50 (W135)

161.50 (W135)

–

–

(W135)

(W135)

1/115

Articles marked ◊ are not held in stock, procurement is effected at short notice.