Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Torches 1447

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

ATEX torches In potentially explosive areas appropriately protected lamps must be used in order not to trigger an explosion, for example, from the spark when turning on the lamp. Therefore the ATEX directives define the following zones: Zone 2: Areas where there is rarely and briefly a risk of explosion. Zone 1: Areas, in which there is occasionally a risk of explosion.

Ex

Zone 0:

For use in potentially explosive areas.

Areas, in which there is a risk of explosion continually or frequently and over a long time period .

ia/ib Protection class intrinsic safety. e

Ignition protection: increased safety. Gas group (IIA = propane, IIB = ethylene, IIC = acetylene/hydrogen). Dust group (IIIA = combustible suspended matter, IIIB = non- conductive dust, IIIC = conductive dust).

IIx

On each torch there should be a code, which provides information about the application area: II Devices in group II may not be used in mining. 1/2/3 Specifies the category, this corresponds to the zone +1. G/D Suitable for gases/vapours (G) or dust (D).

IIIx

Tx

Temperature class, specifies the maximum allowable surface temperature. (T6 = 85 °C, T5 = 100 °C, T4 = 135 °C, T3 = 200 °C, T2 = 300 °C, T1 = 450 °C)

LED torch PX2

Design: Certified gas-, dust- and waterproof safety lamp made of highly resilient and impact- resistant polycarbonate with clip, non-conductive. The rubberised rear switch for single-hand operation is hermetically sealed against the penetration of water and dust. There is also protection against short circuit and incorrectly inserted batteries. ATEX Zone 1, certified, II 2G Ex ib e IIB T4 Gb, working temperature -20 °C to +40 °C. Delivery with 2 micro batteries AAA/LR03.

IP 68

9054

Luminosity lm

Order No. 0201

Lighting duration h

Light range m

Dimensions mm

Weight g

30

24.50

ca. 10

35

142 x 22

40

(W596)

LED torch PX1

Design: Certified gas-, dust- and waterproof safety lamp made of highly resilient and impact-resistant polycarbonate, non-conductive. The rubberised rear switch for single-hand operation is hermetically sealed against the penetration of water and dust. There is also protection against short circuit, the batteries can be inserted regardless of their polarity. ATEX Zone 1, certified, II 2G Ex ib IIB T4 Gb II 2D Ex ib IIIC T 105 °C Db IP 68, working temperature -20 °C to +40 °C. Delivery with 4 Mignon batteries AA/LR06 Note: Compatible with popular headbands and PARASNAP © .

IP 68

9056

Luminosity lm

Order No. 0201

Lighting duration h

Light range m

Dimensions mm

Weight g

120

45.10 (W596)

50

150

167 x 39 200

LED torch PX3

Design: Waterproof safety lamp made of highly resilient and impact-resistant polycarbonate with clip, non-conductive. The rubberised rear switch for single-hand operation is hermetically sealed against the penetration of water and dust. There is also protection against short circuit and incorrectly inserted batteries. ATEX Zone 2, conforms to II 3G Ex nA IIC T4. Delivery with 2 Mignon batteries AA/LR06

IP 68

9059

Luminosity lm

Order No. 0051

Lighting duration h

Light range m

Dimensions mm

Weight g

60

25.50 (W596)

50

100

152 x 23

80

LED torch PX0

Design: Certified gas-, dust- and waterproof safety lamp made of highly resilient and impact- resistant XAG plastic, conductive at high impedance. Additional protection against electrostatic discharge (ESD), electromagnetic interference (EMI) and radio frequency interference (RFI). The rubberised rear switch for single-hand operation is hermetically sealed against the penetration of water and dust. There is also protection against short circuit, the batteries can be inserted regardless of their polarity. ATEX Zone 0, certified, II 1G Ex ia IIC T4 Ga II 2D Ex ib IIIC T 105°C Db IP 68, working temperature -20 °C to +40 °C. Delivery with 4 Mignon batteries AA/LR06 Note: Compatible with popular headbands and PARASNAP © .

IP 68

Soldering/Welding/

Workshop Equipment

9

9059

Luminosity lm

Order No. 1000

Lighting duration h

Light range m

Dimensions mm

Weight g

120

59.10 (W596)

50

150

167 x 39 200

9/7

Articles marked ◊ are not held in stock, procurement is effected at short notice.