Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Deburring tools 151

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Softgrip piercing deburrer set SG 1200

Design: Set consisting of: 1 robust, ergonomically shaped softgrip handle EL SG 3000 GT with comfortable finger hollow and blade magazine (order no. 6719 0020) 1 HSS crank piercing deburrer BO 1000 ∅ 3.2 mm (order no. 6719 0300) Application: Due to the twin mount, all B-blades with a ∅ 2.6 mm and all E-blades with a ∅ 3.2 mm shank can be used. Inner piercings and slots for o-rings as well as securing rings can easily be deburred by connecting with the crank piercing deburrer.

for Ø 2,6 mm Shaft for Ø 3,2 mm Shaft

Cutting Tools 1

6711

Order No. 0010

21.80 (W554)

Double sheet deburrer tool set DB 2000

Design: Set consisting of: 1 sturdy plastic handle with hand protection 2 round HSS cutting discs N 80 (order no. 6719 0600)

Application: The blade runs along the full length on both sides. This allows sheets and bars up to 12 mm in thickness to be deburred on both sides at the same time. For stainless steel sheets corresponding cutting discs N 80 M 42 (Order No. 6719 0610) are available.

6712

Order No. 0010

23.80 (W554)

Keramicut deburrer

Design: Keramicut deburrers are the perfect tool for deburring problems with plastic and light metal workpieces. This results in the following advantages: 1. Due to the extra hard ceramic blade, plastics and other soft materials are easily deburred. 2. Due to the wear-resistant and sturdy ceramic blade, the tool has a long service life. 3. Damage-free work without rejects is possible due to the spherical blade (r = 250 mm). 4. There is no risk of injury due to the blunt 90° blade angle. Application: For on-the-spot removal of materials on plastic and light metal workpieces. Position the blade on the area for deburring at an angle of 60–80° and draw over the workpiece in a continual motion. Do not apply excessive pressure.

6713

Robust, ergonomically shaped softgrip handle with comfortable finger hollow and fixed ceramic blade. Oval plastic grip with replaceable ceramic blade CR 2200. Ceramic blade CR 2200 order no. (6719 0810) straight design (6719 0820) sickle-shaped design

6700

6713

6700

6713

6700

Order No. 0050 0010

42.70

30.20 (W554)

(W554)

1/133

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Made with FlippingBook Online document