Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro
Machine positioning elements/grease guns 1519
Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.
Machine positioning element LEVEL-MOUNT ®
Design: Elastomer body of synthetic rubber, oil and ageing resistant, outer cap of metal, yellow powder coated, pressure plate made of ductile iron, screw made of galvanised steel. Application: For the flexible and anchor-free set-up of machines and presses. Note: The load values listed in the table are reference values , which were determined from the viewpoint of good stability and anchor free installation of machines. Selecting the right element: Determine load per element (machine weight: attachment points), determine type of machine, select elements according to the table below, compare screw size with receiving hole.
0600
2000
4000
5500
8000
Order No.
Load per element
kg
220–600
420–2000
1000–4000
2000–5500
3000–8000
9650
28.80
55.30
81.90
148.50 LM 6-66
245.00 LM 7-77
Model
LM 1-11
LM 3-33
LM 5-55
∅ D
mm mm
80 25
120
160
185
241
Height H
32
35
39
54
Thread ∅ G
M10
M12
M16 x 1.5
M20 x 1.5
M24 x 1.5
Standard screw length L
mm mm
80 15 43
90 20 44
100
120
140
Levelling height Ni
20 44
20 58
20 70
Max. machine foot thickness mm
Weight
kg
0.4
1.1
2.2
4.0
8.0
(W986)
Load per element: presses in general to stroke rate 110/min Milling machines Surface grinders General machinery static minimum load Lathes
450 kg 220 kg 300 kg 220 kg 480 kg 600 kg
1000 kg 420 kg 600 kg 420 kg 1200 kg 2000 kg
2000 kg 1000 kg 1500 kg 1000 kg 3000 kg 4000 kg
3500 kg 2000 kg 2800 kg 2000 kg 4000 kg 5500 kg
6500 kg 3000 kg 3600 kg 3000 kg 7200 kg 8000 kg
m
EPA insulating boards LEVEL-MOUNT ®
Design: Elastomer mould plate made of nitrile butadiene rubber, resistant to oil and ageing. Non-slip, positioning with stop rods. Application: Anchor-free installation of machines and devices without fastening possibilities.
9651
Model
Order No. 0750 1500
Dimension mm
Load per element kg
EPA 7
15.30 21.10 (W986)
70 x 70 x 13 100 x 100 x 13
750 1500
EPA 10
High-pressure push pump
Design: Made of steel with special surface finish and removable tube. Delivery with pointed and hollow mouthpiece, M10 x 1. Application: Suitable for fat.
9540
Nominal content ml
Order No. 0080 0150 0300
80 150 300
8.60
10.60 11.75 (W983)
Suction and pressure sprayer
Design: Made of steel, galvanised, with zinc cover Delivery with transparent PVC flex hose 350 mm. Application: For oils up to SAE 90, petroleum, heating oil and diesel.
Soldering/Welding/
Workshop Equipment
9
9542
Nominal content ml
Order No. 0500
500
11.10 (W983)
9/79
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Made with FlippingBook Online document