Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Oil binding agent/greases and lubricants 1541

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Oil binding agent

Design: Mineral granulate based on calcium silicate hydrate type III R. Absorbing or chemical binding of organic and inorganic compounds, such as oils, used oils, greases, lubricants, alkalis, paints, lacquers, solvents, hydrocarbons. Avoid contact with strong acids and oxidising agents. Non water-repellent and non-buoyant. Bulk weight: approx. 680 g/l, 1 litre of oil binder binds 0.48 litres of fuel oil, grain size: 0.125-1 mm. Area of application: Binds oils and other liquid spills, suitable for traffic areas. For the cleaning and securing of industrial floors and to scatter dangerous traces of oil on roads and taxiways.

9808

Design

Order No. 0020

Colour

20 kg sack (29 litres)

14.70 (W980)

Beige-grey

m

Oil binding agent

Design: Clay-based oil and chemical binding agent (mol granulated, Type III/R. Binds acids, base/alkaline substances (alkaline solutions) for flammable, combustible, aqueous and polar liquids. Suitable for traffic areas. Bulk weight: approx. 500 g/l, 1 litre of oil binder binds 0.5 litres of oil, grain size: 0.5-1 mm. Application: Binds oil, grease, lubricant and petrol, and other leaked liquids.

9808

Design

Order No. 0030

Colour

20 kg sack (40 litres)

23.00 (W980)

red

m

Oil binding agent

Design: PU-foam granules Type III/R, road- and rain-worthy, for all traffic areas. Water- repellent. Very absorbent, odour-neutralising, long storage life, soil conserving. Lower disposal costs thanks to lightweight product. Bulk weight: approx. 405 g/l, 1 litre of oil binder binds 0.6 litres of oil, grain size: 0.5-4 mm. Application: Binds oil, grease, lubricant and petrol, and other leaked liquids.

9808

Design

Order No. 0040

Colour

19 kg sack (40 litres)

17.45 (W980)

dark beige

High-pressure adhesive grease

Design: Temperature resistant from –25 °C to +80 °C, good protection from seawater and salt air, good atmosphere-resistance. Application: For lubricating rolling and plain bearings, even in mixed-friction areas, especially grease lubrication for all permissible running speeds. Corrosion protection of sliding parts, especially cable. Excellent corrosion protection against exposure to aggressive water, gases and alkalis. Ideal for open gears, screws, hinges, bearings, plain bearings and water pumps, water turbines, sluice gates, car washes, cylinder guides, lead screws, screws in underwater equipment, offshore components, lifting equipment, containers and trailer lashing equipment, yachts and shipyard supplier components.

9810

Design

Order No. 1300

PU

300 ml spray can

9.05

12

(W980)

Chain adhesive spray

Design: Temperature resistant from –30 °C to +110 °C, moisture-inhibiting, rust-loosening and water-repellent. Very good adhesion, also does not run off warm surfaces. Application: Suitable for loosening. Very adhesive long-life grease for lubricating cars, motorcycles, bicycles, appliances and lots more. O/X-ring tested. Ideal for chains, wire ropes, all kinds of rods, O-rings, hinges, joints, ball bearings, cable pulleys, door locks, bicycle and worm gear of all kinds.

Soldering/Welding/

Workshop Equipment

9

9812

Design

Order No. 0500

PU

500 ml spray can

6.65

12

(W980)

9/101

Articles marked ◊ are not held in stock, procurement is effected at short notice.