Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Adhesives 1560

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

Special adhesive Tangit PVC-U

Design: PVC glue on tetrahydrofuran basis, stabilised. Meets the requirements of DIN 16970, KRV Directive R 1.1.7 and the construction and testing of drainage systems. VBF: Al. Application: Suitable for longitudinal force joining of pressure pipes (e.g. drinking water and gas pipes) with solvent cement socket or fittings made of PVC-U in line with the recommendations of the Plastic Pipe Association for bonding cable sewer pipes, gutters and lots more made of PVC-U. Note: This product is subject to the prohibition of self service from the Chemical Prohibition Regulation (ChemVerbotsV).

9911

Design

Order No. 0025 0010 0015 0020

PU

125 g tube 250 g can 500 g can

on request on request on request on request

12 12 12

1 kg can

6

(999)

Special cleaner Tangit PE/PP/PB/PVDF

Design: Cleaner based on ethyl alcohol. Application: For the intensive cleaning, degreasing and preparation of welded plastic joints. Preferably for PE, PP, PB, PVDF plastics.

9911

Design

Order No. 0005

PU

1 l bottle

17.75 (W984)

8

Cleaner Tangit PVC-U/C ABS

Design: Cleaner based on acetone/tetrahydrofuran, stabilised. VBF: B. Application: For cleaning PVC-U and PVC-C bonding surfaces for subsequent bonding.

9911

Design

Order No. 0035 0030

PU

125 ml bottle

on request on request

20 12

1 l bottle

(999)

Reaction adhesive UHU PLUS SOFORTFEST

Design: Solvent-free two-component adhesive with an epoxy resin base, for fast bonding on small surfaces. The processing time is up to 2 minutes, firmness to touch is achieved after 5 minutes. End strength is 800 N/cm 2 . The adhesive bond cures transparent, impact-resistant, non-aging and moisture resistant. Application: Especially suited to fast bonding on small surfaces. For metal, glass, porcelain, wood, marble, stone, concrete, thermosetting plastic, glass fibre reinforced plastic, rigid PVC, rubber and lots more. Note: Not suitable for polyethylene, polypropylene, polytetrafluoroethylene, polystyrene, soft PVC and adhesions on large glass surfaces.

Soldering/Welding/

Workshop Equipment

9

9913

Design

Order No. 0045

PU

35 g tubes (binder and hardener)

on request

6

(999)

9/120