Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Reamers 158

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

Hand reamer, quick adjustment

Design: Right cutting, with replaceable blades made of HSS, factory standard and cylinder shank with square drive. The uneven blade pitch ensure chatter-free and accurate drilling. The reamer can be progressively set within the stated adjustment range. The setting should be made using a ring gauge (order no. 4411). Bright surface. Application: Particularly suitable for repair work. Only for reaming through-holes. Not suitable for machining blind holes due to the head screw. Particularly suitable for steel materials up to 500 N/mm 2 in strength e.g. general construction steels, steel materials up to 900 N/mm 2 in strength such as machine steels, tempered steels, tool steels, case-hardening steels, casting materials and non-ferrous metals such as aluminium, brass, copper and bronzes. Note: Tap wrenches for manual actuation – see Ç 1/223.

Factory standard

HSS

Cutting Tools 1

bright

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1505

C

V

V

V

V

1505

Nominal ∅ d 1

Order No.

Adjustment range ∅

Size

Overall length l 1

Cutting edge length l 2

Width of keys

Number of blades

mm 6.4 7.2 8.0 9.0 10.0 11.0 12.0 13.5 15.5 18.0 21.0 24.0 27.5 31.5 37.0 45.0

mm

mm 110 110 115 115 115 125 135 146 166 178 195 218 245 280 325 370

mm

mm

bright

0100 0105 0110 0115 0120 0125 0130 0135 0140 0145 0150 0155 0160 0165 0170 0175

72.00 72.00 72.00 75.70 75.70 75.70 85.00 95.80 98.30

6.4– 7.2 7.2– 8.0 8.0– 9.0 9.0–10.0 10.0–11.0 11.0–12.0 12.0–13.5 13.5–15.5 15.5–18.0 18.0–21.0 21.0–24.0 24.0–27.5 27.5–31.5 31.5–37.0 37.0–45.0 45.0–55.0

000

32 32 34 34 34 35 41 50 60 65 76 82 86 98

3.0 3.4 3.8 4.3 4.9 4.9 6.2 7.0 8.0 9.0

4 4 5 5 5 5 5 5 5 5 5 5 5 6 6 6

00

0 1 2 3 4 5 6 7 8 9

106.50 128.00 135.50 166.50 232.50 300.50 407.00 (W141)

11.0 12.0 14.5 18.0 20.0 26.0

10 11 12 13

108 118

m

Spare blade for hand reamer, adjustable

HSS

Note: Supply only possible in sets.

1506

1506

Size

Size

Order No. 0000 0001 0002 0010 0020 0030 0040 0050

Knife length mm

Number of blades

Order No. 0060 0070 0080 0090 0100 0110 0120 0130

Knife length mm

Number of blades

000

52.40 52.40 52.40 58.30 61.70 61.70 68.90 71.60 (W141)

32 32 34 34 34 35 41 50

4 4 5 5 5 5 5 5

6 7 8 9

77.10 82.10

60 65 76 82 86 98

5 5 5 5 5 6 6 6

00

0 1 2 3 4 5

102.00 106.00 124.50 191.00 216.00 289.00 (W141)

10 11 12 13

108 118

m

Adjustment nut for hand reamer, adjustable

1506

1506

Size

Size

Order No. 5000 5001 5002 5010 5020 5030 5040 5050

Thread

Order No. 5060 5070 5080 5090 5100 5110 5120 5130

Thread

000

2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54

M5 x 0.75 M5.5 x 0.75 M6.5 x 0.75 M7 x 0.75 M7.5 x 0.75 M8 x 0.75 M9.5 x 1.00 M10.5 x 1.00

6 7 8 9

3.37 3.78 4.84 5.25 5.70 8.65

M12.5 x 1.25 M14 x 1.25 M16 x 1.25 M18 x 1.25 M22 x 1.50 M25 x 1.50 M30 x 1.50 M37 x 1.50

00

0 1 2 3 4 5

10 11 12 13

11.80 20.60 (W141)

(W141)

1/140