Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Reamers 167

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Solide Carbide-NC machine reamer

Design: Solid carbide, similar DIN 8093, right cutting, twist fluted, EU pitch, for mounting in hydraulic expansion chucks, shrink chucks and high accuracy chucks. TiAIN coated surface For H7 fits. Application: For reaming through holes. Particularly suitable for high alloy and annealed steels up to 52 HRC as well as casting materials.

DIN 8093-2

Form B

Solid carbide

H7

Cutting Tools 1

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1582

15

12

8

6

4

16

1582

1582

Nominal ∅

Nominal ∅

Order No.

Cutting length mm

Total length mm

Shank ∅ h6 mm

Order No.

Cutting length mm

Total length mm 93.0 101.0 109.0 109.0 117.0 117.0 125.0 125.0 133.0 151.0

Shank ∅ h6 mm

mm

mm 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 12.0

TiAlN

TiAlN

0100 0150 0200 0250 0300 0320 0350 0400 0450 0500 0550

1.0 1.5 2.0 2.5 3.0 3.2 3.5 4.0 4.5 5.0 5.5

57.10 57.10 54.30 57.10 57.10 68.00 68.00 68.00 76.20 76.20 81.90 (W141)

6 9

50.0 50.0 50.0 60.0 65.0 65.0 75.0 75.0 80.0 93.0 93.0

3 3 3 3 4 4 4 4 6 6 6

0600 0650 0700 0750 0800 0850 0900 0950 1000 1200

81.90

26 28 31 31 33 33 36 36 38 44

6 6 8 8 8 8

105.50 105.50 105.50 105.50 124.50 124.50 124.50 124.50 159.50 (W141)

12 16 17 18 18 19 21 23 26

10 10 10 12

High performance reamer HNC for through-hole

Design: High performance reamer HNC with internal cooling for through-hole with special HPC cutting geometry, right cutting, twist fluted, EU pitch, for mounting in hydraulic expansion chucks, shrink chucks and high accuracy chucks. TiAIN coated surface Full ∅ fit H7, hundredth ∅ tolerance +0.004/0. Application: For reaming through holes. Particularly suitable for high alloy and steels as well as casting materials.

Solid carbide

Factory standard

H7

DIN 6535-HA

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1583

180

140

80

90

1583

1583

Nominal ∅

Nominal ∅

Order No.

Cutting length mm

Total length mm

Shank ∅ h6 mm

Order No.

Cutting length mm

Total length mm

Shank ∅ h6 mm

mm 3.97 3.98 3.99 4.00 4.01 4.02 4.03 4.50 4.97 4.98 4.99 5.00 5.01 5.02 5.03 5.50 5.97 5.98 5.99 6.00 6.01 6.02

mm

TiAlN

TiAlN

0397 0398 0399 0400 0401 0402 0403 0450 0497 0498 0499 0500 0501 0502 0503 0550 0597 0598 0599 0600 0601 0602

103.00 ◊ 103.00 ◊ 103.00 ◊ 95.60 ◊ 103.00 ◊ 103.00 ◊ 103.00 ◊ 107.50 ◊ 107.50 ◊ 107.50 ◊ 107.50 ◊ 98.40 ◊ 107.50 ◊ 107.50 ◊ 107.50 ◊ 110.00 ◊ 110.00 ◊ 110.00 ◊ 110.00 ◊ 101.50 ◊ 110.00 ◊ 110.00 ◊

12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

0603 0650 0700 0750 0797 0798 0799 0800 0801 0802 0803 0850 0900 0950 0997 0998 0999 1000 1001 1002 1003 1050

6.03 6.50 7.00 7.50 7.97 7.98 7.99 8.00 8.01 8.02 8.03 8.50 9.00 9.50 9.97 9.98 9.99 10.00 10.01 10.02 10.03 10.50

110.00 ◊ 105.50 ◊ 98.70 ◊ 116.00 ◊ 116.00 ◊ 116.00 ◊ 116.00 ◊ 107.50 ◊ 116.00 ◊ 116.00 ◊ 116.00 ◊ 132.50 ◊ 125.00 ◊ 132.50 ◊ 132.50 ◊ 132.50 ◊ 132.50 ◊ 154.50 ◊ 161.50 ◊ 161.50 ◊ 161.50 ◊ 200.00 ◊

12 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20

75 100 100 100 100 100 100 100 100 100 100 100 100 120 120 120 120 120 120 120 120 120

6 8 8 8 8 8 8 8 8 8 8

10 10 10 10 10 10 10 10 10 10 12

(W143)

(W143)

Continued overleaf

1/149

Articles marked ◊ are not held in stock, procurement is effected at short notice.