Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro
Thread cutting tools 183
Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.
Hand tap set
Design: HSS-E, DIN 352, tolerance range ISO 2/6H, type INOX, bright surface. 3 piece set consisting of roughing tap with point form A (6–8 threads), second tap with point form D (3.5–5 threads) and finish tap with point form C (2–3 threads). Application: For regular metric threads according to ISO DIN 13. Particularly suitable for high strength materials up to 1200 N/mm 2 in strength and rust-free and acid-resistant steels.
DIN 352
ISO 2 6H
Type INOX
M
HSS-E
60°
Cutting Tools 1
≤ 3xd
6–8
A
Roughing tap
3,5–5
D
Intermediate tap
2–3
C
Finish tap
bright
Steels up to 850 N/mm 2
Steels up to 1000 N/mm 2
Steels up to 1400 N/mm 2
Hard machining over 60 HRC
Ti steels, Ti alloys, special steels
Stainless and acid- resistant steels (INOX)
Steels up to 42 HRC
Steels up to 52 HRC
Steels up to 56 HRC
Steels up to 60 HRC
Copper, brass, bronze
Cast iron materials
Al, Al and Mg alloys
Order No. 1618
C
C
U
V
C
V
U
C
C
Thread 1618
Thread 1618
Order No.
Gradient
Total length mm
Square shank mm
Core hole ∅ mm
Order No.
Gradient
Total length mm
Square shank mm
Core hole ∅ mm
mm
mm
bright
bright
0020 0025 0030 0035 0040 0050 0060
M2 65.60 M2.5 58.00 M3 42.80 M3.5 53.10 M4 42.80 M5 45.40 M6 48.00
0.40 36 0.45 40 0.50 40 0.60 45 0.70 45 0.80 50 1.00 50
2.1 2.1 2.7 3.0 3.4 4.9 4.9
1.60 2.05 2.50 2.90 3.30 4.20 5.00
0080 0100 0120 0140 0160 0200
M8 53.10 M10 65.60 M12 82.10 M14 113.50 M16 88.40 M20 134.00
1.25 56 1.50 70 1.75 75 2.00 80 2.00 80
4.9 6.80 5.5 8.50 7.0 10.20 9.0 12.00 9.0 14.00
2.50 95 12.0 17.50
(W160)
(W160)
Hand tap set for left thread
Design: HSS, DIN 352, tolerance range ISO 2/6H, type N, bright surface. 3 piece set consisting of roughing tap with point form A (6–8 threads), second tap with point form D (3.5–5 threads) and finish tap with point form C (2–3 threads). Application: For metric left threads according to DIN ISO 13. Particularly suitable for high strength materials up to 1200 N/mm 2 in strength and rust-free and acid-resistant steels.
DIN 352
ISO 2 6H
Type N
M-LH
HSS
60°
≤ 3xd
6–8
A
Roughing tap
3,5–5
D
Intermediate tap
2–3
C
Finish tap
bright
Steels up to 850 N/mm 2
Steels up to 1000 N/mm 2
Steels up to 1400 N/mm 2
Hard machining over 60 HRC
Ti steels, Ti alloys, special steels
Stainless and acid- resistant steels (INOX)
Steels up to 42 HRC
Steels up to 52 HRC
Steels up to 56 HRC
Steels up to 60 HRC
Copper, brass, bronze
Cast iron materials
Al, Al and Mg alloys
Order No. 1612
C
C
U
V
U
V
U
C
C
Thread 1612
Thread 1612
Order No.
Gradient
Total length mm
Square shank mm
Core hole ∅ mm
Order No.
Gradient
Total length mm
Square shank mm
Core hole ∅ mm
mm
mm
bright
bright
0030 0040 0050 0060 0080 0100
M3 48.00 M4 48.50 M5 48.50 M6 49.50 M8 60.10 M10 74.60
0.50 40 0.70 45 0.80 50 1.00 50 1.25 56 1.50 70
2.7 3.4 4.9 4.9 4.9 5.5
2.50 3.30 4.20 5.00 6.80 8.50
0120 0140 0160 0180 0200
M12 87.90 M14 125.00 M16 142.00 M18 196.00 M20 176.00
1.75 75 7.0 10.20 2.00 80 9.0 12.00 2.00 80 9.0 14.00 2.50 95 11.0 15.50 2.50 95 12.0 17.50
(W160)
(W160)
1/165
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Made with FlippingBook Online document