Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro
Thread cutting tools 193
Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.
Cutting tap 1/4" bit
Design: Tap bit, 1/4" hexagon mount for metric ISO thread according to DIN 13. Application: Cutting tap bits are designed for thread drilling with cordless screw drills and handheld drills with left and right motion. However, they are also suitable for drilling by hand and on stationary drilling machines. Your cordless screw drill should have a minimum power of 7.5 Volt. Make sure that the tool axis and hole axis are precisely aligned and use appropriate cutting oil. rpm: lowest settings (0–450 min -1 ), torque: maximum setting.
DIN 13
M
HSS
Cutting Tools 1
1/4"
Steels up to 850 N/mm 2
Steels up to 1000 N/mm 2
Steels up to 1400 N/mm 2
Hard machining over 60 HRC
Ti steels, Ti alloys, special steels
Stainless and acid- resistant steels (INOX)
Steels up to 42 HRC
Steels up to 52 HRC
Steels up to 56 HRC
Steels up to 60 HRC
Copper, brass, bronze
Cast iron materials
Al, Al and Mg alloys
Order No. 1649
C
V
1649
Nominal ∅ mm
Order No. 0030 0040 0050 0060 0080 0100
Total length mm
Cutting length mm
Width of keys mm
M3 M4 M5 M6 M8
3.45 3.45 4.26 4.26 6.20 7.25
33 35 36 39 40 41
11 12 15 18 19 21
6.35 6.35 6.35 6.35 6.35 6.35
M10
(W161)
Cutting tap 1/4" bit set
Design: Supplied in a plastic box.
1649 0105
1649 0110
1649
Size
Order No. 0105 0110
Set contents
M3–M10 M3–M10
27.30 43.90
6 tap bits, M3; 4; 5; 6; 8; 10
1 bit holder 6 tap bits, M3; 4; 5; 6; 8; 10 6 core hole drill bits, ∅ 2.5; 3.3; 4.2; 5.0; 6.8; 8.5
(W161)
1/175
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Made with FlippingBook Online document