Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro
Drilling tools
27
Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.
Design: HSS, similar to DIN 1897, Type DK 77. Profile grinding, steam tempered surface, right cutting, with precise double-sided point geometry. With small cross-cutting and curved grinding around the circumference (no bevels). Point thinning according to DIN 1412, form A, Normal angle of rake, core thickness and core gradient. Application: For drilling thin workpieces. For round and accurate drill holes (important for riveting). Particularly suitable for bodywork and metalwork, rivet holes, screw holes etc. as well as for use in hand drills. Note: Further dimensions available on request. Extra-short sheet metal drills with cyl. Shank
DIN 1897
HSS
118°
25–30°
Cutting Tools 1
steam
Steels up to 850 N/mm 2
Steels up to 1000 N/mm 2
Steels up to 1400 N/mm 2
Hard machining over 60 HRC
Ti steels, Ti alloys, special steels
Stainless and acid- resistant steels (INOX)
Steels up to 42 HRC
Steels up to 52 HRC
Steels up to 56 HRC
Steels up to 60 HRC
Copper, brass, bronze
Cast iron materials
Al, Al and Mg alloys
Order No. 1064
C
U
V
U
V
V
1064
1064
∅ h8
∅ h8
Order No.
PU
Order No.
PU
Spiral length mm
Total length mm
Spiral length mm
Total length mm
mm
mm
steam
steam
0250 0300 0310 0320 0330 0350 0400 0410
2.5 3.0 3.1 3.2 3.3 3.5 4.0 4.1
1.37 1.19 1.21 1.21 1.21 1.31 1.56 1.56
10 10 10 10 10 10 10 10
9.5 11.0 11.0 11.0 11.0 12.0 14.0 14.0
43 46 49 49 49 52 55 55
0420 0450 0480 0500 0510 0520 0600
4.2 4.5 4.8 5.0 5.1 5.2 6.0
1.56 1.60 1.87 1.72 1.99 1.99 2.26
10 10 10 10 10 10 10
14.0 16.0 17.0 17.0 17.0 17.0 19.0
55 58 62 62 62 62 66
(W100)
(W100)
Machining drill (short drill) with cylinder Shank
Design: HSS, DIN 1897, type N. Profile grinding, right cutting, with precise point geometry. Point thinning up to ∅ 2.4 mm similar to cross-grinding; from ∅ 2.4 mm according to DIN 1412, form A, Normal angle of rake, core thickness and core gradient. Application: Suitable for use on machines, bench drills and hand drills. Particularly suitable for construction steels and steels up to 800 N/mm 2 in strength and for thin-walled materials (bodywork).
DIN 1897
Type N
HSS
1055
118°
25–30°
steam
1056
steam
Steels up to 850 N/mm 2
Steels up to 1000 N/mm 2
Steels up to 1400 N/mm 2
Hard machining over 60 HRC
Ti steels, Ti alloys, special steels
Stainless and acid- resistant steels (INOX)
Steels up to 42 HRC
Steels up to 52 HRC
Steels up to 56 HRC
Steels up to 60 HRC
Copper, brass, bronze
Cast iron materials
Al, Al and Mg alloys
Order No. 1055 1056
25 25
25 25
20 20
40 40
50 50
6WHHOV XSWR
6WHHOV XSWR
1055
1056
1055
1056
∅ h8 mm
∅ h8 mm 5.80 6.00 6.50 6.80 7.00 8.00 8.50 9.00
Order No.
PU
Order No.
PU
Spiral length mm
Total length mm
Spiral length mm
Total length mm
1PP
1PP
f mm/rev
f mm/rev
steam
steam
steam
steam
0100 0150 0200 0250 0300 0310 0320 0330 0340 0350 0400 0410 0420 0450 0500 0510 0520 0550 0570
1.00 0.97 2.42 1.50 0.94 2.14 2.00 1.12 1.54 2.50 1.12 1.78 3.00 1.12 1.78 3.10 1.12 2.34 3.20 1.12 2.28 3.30 1.12 2.34 3.40 1.12 2.94 3.50 1.12 2.14 4.00 1.38 2.14 4.10 1.50 2.56 4.20 1.50 2.52 4.50 1.71 2.59 5.00 1.84 2.70 5.10 1.99 4.13 5.20 2.32 4.13 5.50 2.32 3.57 5.70 2.32 4.83
10 6 10 9 10 12 10 14 10 16 10 18 10 18 10 18 10 20 10 20 10 22 10 22 10 22 10 24 10 26 10 26 10 26 10 28 10 28
26 0.016 32 0.050 38 0.050 43 0.063 46 0.080 49 0.080 49 0.100 49 0.100 52 0.100 52 0.100 55 0.100 55 0.100 55 0.100 58 0.100 62 0.100 62 0.125 62 0.125 66 0.125 66 0.125
0580 0600 0650 0680 0700 0800 0850 0900
2.32 2.35 2.58 2.88 2.88 3.52 3.90 4.49 5.35
5.25 3.57 4.27 6.70 5.20 5.90 8.55 7.85 9.45
10 28 66 0.125 10 28 66 0.125 5 31 70 0.160 5 34 74 0.160 5 34 74 0.160 5 37 79 0.160 5 37 79 0.200 5 40 84 0.200 5 43 89 0.200 1 47 95 0.200 1 51 102 0.200 1 51 102 0.200 1 54 107 0.200 1 56 111 0.200 1 58 115 0.200 1 60 119 0.200 1 62 123 0.200 1 64 127 0.200 1 66 131 0.200
1000 10.00 1100 11.00 1200 12.00
6.00 17.30 7.50 22.30
1300 13.00 11.80 23.40 1400 14.00 13.65 27.70
1500 15.00 – 1600 16.00 – 1700 17.00 – 1800 18.00 – 1900 19.00 – 2000 20.00 –
29.90 33.50 41.10 42.50 49.00 53.30
(W100)
(W101)
(W100)
(W101)
1/9
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Made with FlippingBook Online document