Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

First page Table of contents Previous page 29 Next page Last page

Drilling tools

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Machining drill (short drill) with cylinder Shank

Continued

6WHHOV XSWR

1058

1061

1058

1061

∅ h8 mm 6.20 6.30 6.40 6.50 6.60 6.70 6.80 6.90 7.00 7.10 7.20 7.30 7.40 7.50 7.60 7.70 7.80 7.90 8.00 8.10 8.20 8.30 8.40 8.50 8.60 8.70 8.80 8.90 9.00

∅ h8 mm

Order No.

Spiral length mm

Total length mm

Spiral length mm

Total length mm

1PP

f mm/rev

Cutting Tools 1

steam

TiN

steam

TiN

0620 0630 0640 0650 0660 0670 0680 0690 0700 0710 0720 0730 0740 0750 0760 0770 0780 0790 0800 0810 0820 0830 0840 0850 0860 0870 0880 0890 0900 0910 0920 0930 0940 0950 0960

4.81 5.10 4.68 4.68

8.60 8.60 8.60 8.60

0970 0980 0990

9.70 10.75 18.70 9.80 10.30 18.70 9.90 14.60 18.70

5 31 5 31 5 31 5 31 5 31 5 31 5 34 5 34 5 34 5 34 5 34 5 34 5 34 5 34 5 37 5 37 5 37 5 37 5 37 5 37 5 37 5 37 5 37 5 37 5 40 5 40 5 40 5 40 5 40 5 40 5 40 5 40 5 40 5 40 5 43

70 0.080 70 0.080 70 0.100 70 0.100 70 0.100 70 0.100 74 0.100 74 0.100 74 0.100 74 0.100 74 0.100 74 0.100 74 0.100 74 0.100 79 0.100 79 0.100 79 0.100 79 0.100 79 0.100 79 0.125 79 0.125 79 0.125 79 0.125 79 0.125 84 0.125 84 0.125 84 0.125 84 0.125 84 0.125 84 0.125 84 0.125 84 0.125 84 0.125 84 0.125 89 0.125

5 43 5 43 5 43 5 43 5 43 5 43 5 47 5 47 5 47 5 47 5 47 5 51 5 51 5 51 5 51 1 54 1 54 1 54 1 56 1 56 1 56 1 58 1 58 1 58 1 60 1 60 1 62 1 62 1 62 1 64 1 64 1 66 1 66 1 66

89 0.125 89 0.125 89 0.125 89 0.125 89 0.125 89 0.125 95 0.125 95 0.125 95 0.125 95 0.125 95 0.125 102 0.125 102 0.125 102 0.160 102 0.160 107 0.160 107 0.160 107 0.160 111 0.160 111 0.160 111 0.160 115 0.160 115 0.160 115 0.160 119 0.200 119 0.200 123 0.200 123 0.200 123 0.200 127 0.200 127 0.200 131 0.200 131 0.200 131 0.200

1000 10.00

9.85 16.60

4.81 11.30 5.75 11.30 5.10 11.30 5.55 11.30 5.10 10.40 6.05 10.80 6.35 10.80 7.50 10.80 5.75 10.80 5.70 10.80 8.60 14.55 7.90 12.10 7.10 12.10 8.25 12.10 6.65 11.30 8.05 13.40 7.50 13.40 8.70 13.40 8.60 13.40 7.35 13.40 8.35 13.65 9.20 13.65 8.90 13.65 9.90 17.90 8.05 13.65

1020 10.20 10.40 17.05 1050 10.50 11.05 18.40

1080 10.80 14.25

–

1100 11.00 12.55 18.90

1120 11.20 15.55

–

1150 11.50 13.95 22.00 1180 11.80 15.35 14.15 1200 12.00 15.15 23.80 1250 12.50 17.10 23.80 1300 13.00 17.70 37.00 1350 13.50 19.90 46.00 1380 13.80 25.80 39.10 1400 14.00 19.90 46.00 1450 14.50 23.10 55.70 1280 12.80 21.10 – 1600 16.00 27.10 78.50 1650 16.50 73.90 85.00 1700 17.00 61.90 71.50 1750 17.50 61.50 70.70 1800 18.00 58.70 67.40 1850 18.50 94.60 108.50 1900 19.00 75.00 86.30 1950 19.50 124.50 143.50 1775 17.75 – 70.60 1480 14.80 47.30 – 1500 15.00 23.50 53.40 1550 15.50 23.70 66.00 1575 15.75 – 73.30

9.10 10.50 16.60

9.20

9.40 16.60

9.30 10.00 16.60

9.40 11.50

–

1975 19.75 –

125.00

9.50

8.80 18.70

2000 20.00 117.50 135.00

(W100)

9.60 10.85 18.70

(W100)

Machining drill set

Design: HSS Co5, DIN 1897, type INOX. Profile grinding, right cutting, with precise point geometry and excellent thermal resistance. Point thinning from ∅ 2.4 mm similar to according to DIN 1412, form A, normal angle of rake, core thickness thicker than normal and normal core gradient. Supplied in a robust, high quality metal cassette with automatic drill setup function when opened. Application: Suitable for use on machines, bench drills and hand drills. Particularly suitable for rust/acid-resistant steels (VA steels), spring steels, austenitic steels and special alloys such as Hastelloy ® , Inconel ® and Nimonic ® . Note: Set consisting of (Order No. 1058).

steam

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1058

1058

Set contents ∅ h8

Order No.

Number of drills

Increasing

Piece

steam

0007

1.0–10.5

102.00 (W100)

0.5 + K.B.*

* With intermediate sizes for tapped holes: 1 piece each ∅ 3.3; 4.2; 6.8; 10.2 mm.

1/11

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Made with FlippingBook Online document