Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Jigsaw blades 371

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Saw blade quality Soft wood: High carbon steel for use in softer materials such as wood, wood fibre boards and plastics. HSS: Fully hardened high-speed steel for use in harder materials such as metal, aluminium and non-ferrous metals. Bimetal: Highly flexible, almost non-breakable combination of HCS and HSS, long service life. Can be used for hard woods, abrasive wooden materials, hard plastic, non-ferrous metals and metals. Carbide-tipped: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete. Tooth design: Teeth milled, side clearance side set: Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals. Teeth milled, side clearance wavy set: Blade with fine result for straight cuts in plywood, soft steel, aluminium, non-ferrous metals and plastics.

Teeth ground, side clearance side set: Blade for clean, fast cuts in wood. Teeth ground, side clearance lead angle ground: Blade with taper ground back for side clearance; for precise, fine and clean cuts in wood and plastic. Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals. Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic. Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets), is recommended in order to extend the wear-resistance of the saw blade.

Cutting Tools 2

Jigsaw blades for wood

Teeth ground, side clearance side set: Blade for clean, fast cuts in wood. Teeth ground, side clearance lead angle

Saw blade quality: HCS: High carbon steel for use in softer materials such as wood, wood fibre boards and plastics. Bimetal: Highly flexible, almost non-breakable combination of HSC and HSS, long service life. Can be used for hard woods, abrasive wooden materials, hard plastic, non-ferrous metals and metals. Tooth design: Teeth milled, side clearance side set: Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals. Teeth milled, clearance wavy set: Blade with fine result for straight cuts in plywood, soft steel, aluminium, non-ferrous metals and plastics.

ground: Blade with taper ground back for side clearance; for precise, fine and clean cuts in wood and plastic. Design: 5 pieces on card. Suitable for: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.

2736

Bosch No. 2735

Order No. 0005

Cutting length mm

Material

Wood mm

Tooth pitch mm

Type of tooth

Use

T 101 B

5.95

6.85

74

HCS 3– 30 2.7 teeth ground; side clear- ance lead angle ground

For straight, fine cuts, fibre boards, plastic/epoxy, with plunge tip.

0010

T 301 CD

6.45

7.45

91

HCS 10– 65

3

teeth ground; side clear- ance lead angle ground teeth ground; side clear- ance lead angle ground

For straight, fine cuts.

0015

T 101 D

5.95

6.85

74

HCS 10– 45 progressive 4–5.2

For straight, clean cuts, with plunge tip.

0020

T 101 BR

7.00

8.10

74

HCS 3– 30 2.5 teeth ground; side clear- ance lead angle ground

For straight, fine cuts, splinter-free sawing thanks to reverse tooth pattern.

0026

T 144 DP

–

7.45

74

HCS 5– 50

4

ground; side set Milled, wavy set Milled, wavy set ground; side set

For straight, exactly angled cuts, with plunge tip.

0027

T 119 B

–

3.64

67

HCS 2– 15 progressive 1.9–2.3

For soft wood, plywood, chipboard, wood core plywood, fibre boards.

0028

T 119 BO –

5.00

56

HCS 2– 15

2

For soft wood, plywood, chipboard, wood core plywood, fibre boards, specially designed for curved cuts.

0030

T 344 DP 12.15 14.05

126

HCS 5–100

4

For thick timber, soft wood, chipboard, wood core plywood, fibre boards, exactly angled cut.

0035

T 111 C

3.15

3.64

74

HCS 4– 50

3

milled; side set

For soft wood, plywood, chipboard, wood core plywood, fibre boards, fast cut.

0040

T 144 D

4.18

4.82

74

HCS 5– 50 progressive 4–5.2

ground; side set

For soft wood, plywood, chipboard, wood core plywood, fibre boards, fast cut with plunge tip.

0041

T 234 X

–

10.40

91

HCS 3– 65 progressive 2–3

teeth ground; side clear- ance lead angle ground For soft wood, plywood, chipboard, wood core plywood, fibre boards, fast cut with plunge tip.

(W248)

(W247)

Continued overleaf

2/117

Articles marked ◊ are not held in stock, procurement is effected at short notice.