Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Band saw blades 385

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Carbide-Band saw blade DUROSET

Design: Set carbide band saw blade for the performance-related machining of steels. Application: For universal use on all band saw machines, including swing frames and band saw machines not suitable for carbide. Increased performance and tool life compared with bimetal saw blades.

Cutting Tools 2

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2763

50–120

50–100

20–65

20–65

20–55

55–70

70

70

120

120

2763

2763

Length mm

Length mm

Order No. 3601 3801 4401 4501 4101

Width mm

Thickness mm

Teeth per inch

Order No. 4601 5301 4102 4602 5302

Width mm

Thickness mm

Teeth per inch

3660 3830 4400 4570 4115

202.50 211.50 264.50 274.00 228.50 (W263)

27 27 34 34 41

0.9 0.9 1.1 1.1 1.3

3–4 3–4 3–4 3–4 2–3

4640 5334 4115 4640 5334

256.50 293.50 264.00 296.50 339.50 (W263)

41 41 41 41 41

1.3 1.3 1.3 1.3 1.3

2–3 2–3 3–4 3–4 3–4

Band saw coil Wikus DIAMANT

Design: Made of alloyed tool steel for good wear resistance at tooth tips as well as the mount. In addition, the saw blade possesses an especially hardened blade backing, providing increased sturdiness and minimum wear, which allows for greater cutting parameters. Supplied in 30.5 m coils. Application: For general sawing work with plain and low-alloy steels and non-ferrous metals. Preferably for smaller and medium size cross cuts up to max. 70 mm length of path of contact. N = Normal tooth, cutting angle 0°. H = Claw tooth, cutting angle positive.

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2765

C

U

V

2765

2765

Width mm

Width mm

Order No. 0001 0004 0007 0010 0013 0016 0019 0022 0025 0028 0034

PU

Order No. 0037 0040 0043 0046 0049 0055 0058 0061 0064 0067

PU

Thickness mm

Number of teeth per inch

Thickness mm

Number of teeth per inch

6 6 6 6 6 6 8 8 8 8

60.70 60.70 60.70 60.70 60.70 60.70 60.70 60.70 60.70 60.70 60.70 (W262)

5 5 5 5 5 5 5 5 5 5 5

0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65

6 N 8 N

10 10 10 10 10 13 13 13 13 13

60.70 60.70 60.70 60.70 60.70 70.40 70.40 70.40 70.40 70.40 (W262)

5 5 5 5 5 5 5 5 5 5

0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65

6 H 8 N

10 N 14 N 18 N 24 N 10 N 14 N 18 N 8 N

10 N 14 N 18 N

4 H 6 H 8 N

10 N 14 N

Further dimensions available on request.

10

4 H

2/131

Articles marked ◊ are not held in stock, procurement is effected at short notice.