Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Drilling tools

50

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

Spiral drill set with cyl. Shank

Design: HSS Co5, DIN 338, TiN coated surface, type FU. Profile grinding, right cutting, with precise point geometry as well as special point thinning and excellent thermal resistance. Angle of rake larger than normal (35°), core thickness thicker than normal and normal core gradient. Set consisting of (order no. 1023). Supplied in a robust, high quality plastic cassette with automatic drill setup function when opened.

HSS Co5

DIN 338

Type FU

118°

38°

Cutting Tools 1

TiN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1024

35

18

40

70

63

18

15

1024

Set contents ∅ h8 mm

Order No.

Number of drills Piece

Increasing

mm 0.5

TiN

0005 0007 0009

1.0–10.0 1.0–10.5 1.0–13.0

133.00 180.00 237.00 (W100)

19 24 25

0.5 + K.B.*

0.5

* With intermediate sizes for tapped holes: 1 piece each ∅ 3.3; 4.2; 6.8; 10.2 mm.

Spiral drill with cyl. Shank

Design: HSS Co5, DIN 338, type TF. Particularly sturdy model. Profile grinding, right cutting, bright surface, nitrated bevels from ∅ 2.4 mm with precise point geometry as well as wide clamping slots with heavily rounded back edges and excellent thermal resistance. Point thinning according to DIN 1412, form A. Angle of rake larger than normal, core thickness thicker than normal and without core gradient. Application: Suitable for drilling depths above 3 x D due to bevel nitration and wide clamping slots. Particularly suitable for alloyed/ non-alloyed steels and casting types above 800 N/mm 2 in strength, hot and cold work steels, roller bearing steels, high-alloy steels, tempered steels and case hardening steels.

HSS Co5

DIN 338

Type TF

130°

38°

Nitrated

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1022

20

15

12

18

40

30

6WHHOV XSWR

6WHHOV XSWR

1022

1022

∅ h8

∅ h8

Order No.

PU

Order No.

PU

Spiral length mm

Total length mm

Spiral length mm

Total length mm

1PP

1PP

f mm/rev

f mm/rev

mm

mm

Nitrated

Nitrated

0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260

1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6

3.26 3.39 3.39 3.32 3.39 3.06 3.08 3.08 3.08 3.08 2.82 3.04 3.04 3.04 3.04 2.86 3.04

10 12 10 14 10 16 10 16 10 18 10 18 10 20 10 20 10 22 10 22 10 24 10 24 10 27 10 27 10 30 10 30 10 30

34 0.012 36 0.032 38 0.032 38 0.032 40 0.032 40 0.032 43 0.032 43 0.032 46 0.032 46 0.032 49 0.032 49 0.040 53 0.040 53 0.040 57 0.040 57 0.040 57 0.050

0270 0280 0290 0300 0310 0320 0330 0340 0350 0360 0370 0380 0390 0400 0410 0420 0430

2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3

3.23 3.32 3.32 2.99 3.23 3.39 3.52 3.89 3.23 3.81 3.89 4.16 4.40 3.54 4.40 4.09 4.58

10 33 10 33 10 33 10 33 10 36 10 36 10 36 10 39 10 39 10 39 10 39 10 43 10 43 10 43 10 43 10 43 10 47

61 0.050 61 0.050 61 0.050 61 0.050 65 0.050 65 0.063 65 0.063 70 0.063 70 0.063 70 0.063 70 0.063 75 0.063 75 0.063 75 0.063 75 0.063 75 0.063 80 0.063

(W100)

(W100)

Continued overleaf

1/32

Made with FlippingBook Online document