Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Lathe chuck 527

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Three-jaw scroll chuck

with retention stud and collar nut

Design: With short taper mount DIN 55027. Body made from cast iron or steel with one-piece jaws and scroll, centric clamping. Application: For use on lathes, rotary tables, indexing devices etc., where high clamping forces and high concentricity and accurate repetition are required. Scope of delivery: Three-jaw lathe chuck with chuck key and mounting screws. Note: Replacement jaws are found on Ç 3/7.

DIN 55027

A

3010 3011 3012

With a set of one-piece reversible jaws.

With one set of inward and outward stepped jaws.

With one set of inward and outward stepped jaws.

Systems

Clamping

3

3010

3011/3012

3010

3011

3012

Size A mm 160 160 200 200 250 250 315 315 400 400

Order No.

Taper size B mm

Height D mm

Concentricity

Max. rpm min -1 3010 3011 3012

Short taper

Through- hole ∅ E mm

mm

Steel

Steel

Steel ZS

0001 0003 0005 0007 0009 0011 0013 0015 0001 0003

548.50 548.50 721.00 721.00

626.00 ◊

– – – – – – – –

4 5 5 6 5 6 6 8 8

42 42 55 55 76 76

63.5 82.5 82.5

69.7 0.04 3600 4600 – 69.7 0.04 3600 4600 – 80.2 0.06 3000 4000 – 80.2 0.06 3000 4000 – 89.9 0.06 2500 3000 – 89.9 0.06 2500 3000 –

626.00 821.00 821.00

106.4

943.50 1076.00 943.50 1076.00 1405.00 1602.00 ◊ 1405.00 1602.00 ◊

82.5

106.4

103 103 136 136

106.4 100.4 0.08 2000 2300 – 139.7 100.4 0.08 2000 2300 –

– –

– –

3142.00 ◊ 3142.00 ◊

139.7 113.4 0.08 196.6 113.4 0.08

– – 1800 – – 1800

11

(W300)

(W301)

(W301)

Three-jaw scroll chuck ZS

Design: With short taper mount DIN 55029 with stud bolt for Camlock. Body made from steel with one-piece jaws and scroll, centric clamping. Application: For use on lathes, rotary tables, indexing devices etc., where high clamping forces and high concentricity and accurate repetition are required. Scope of delivery: Three-jaw lathe chuck with chuck key and mounting screws, with one set of outward-stepped jaws (drilling jaws)

DIN 55029

with retention stud for Camlock

A

and one set of inward-stepped jaws (rotary jaws). Note: Replacement jaws are found on Ç 3/7.

3014

Size A mm 100 125 160 160 200 200 250 250 315 315 315 400 400

Order No.

Taper size B mm 53.9 63.5 63.5 82.5 82.5 106.4 106.4 139.7 106.4 139.7 196.9 139.7 196.6

Height D mm

Concentricity

max. rpm

Short taper

Through-hole ∅ E mm

mm

min -1 6300 5500 4600 4600 4000 4000 3000 3000 2300 2300 2300 1800 1800

Steel ZS

0001 0003 0005 0007 0009 0011 0013 0015 0017 0019 0021 0023 0025

410.00 ◊ 512.00 ◊

3 4 4 5 5 6 6 8 6 8

20 32 42 42 55 55 76 76 103 103 103 136 136

75 69 66 66

0.04 0.04 0.04 0.04 0.06 0.06 0.06 0.06 0.08 0.08 0.08 0.08 0.08

656.00

656.00 ◊ 860.00 860.00 1128.00 1128.00 1679.00 ◊ 1679.00 ◊ 1679.00 ◊ 3286.00 ◊ 3286.00 ◊

74.5 74.5

83 83 96 96 104 106 106

11

8

11

(W301)

3/5

Articles marked ◊ are not held in stock, procurement is effected at short notice.