Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Scroll chuck 531

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Female/male square socket key

Design: Made from special steel, shank and fulcrum pin hardened and burnished. Fulcrum pin pressed in.

3060

With female square. 3061

With male square.

3061

3060

Square

Order No.

Length mm 3060 3061 80 80 80 80 100 80 100 100 – 100 200 100 200 120 250 160 320 200

mm

0080 0100 0125 0160 0200 0250 0315 0400 0500

6 8 9

7.35

8.35

3060

10.20 12.35 11.80 26.70 31.70 43.50 55.00 (W303) –

10.60 10.60 13.45 13.65 15.75 20.70 31.70 37.20 (W303)

10 11 12 14 17 19

3061

Systems

Clamping

Female square safety key with extractor pin

3

Design: Spring bearings, prevent forgetting to pull out.

3062

Square mm

Order No. 0100 0125 0160 0200 0250 0315

Length mm

8 9

35.20 35.20 44.30 44.30 53.40 62.30 (W300)

130 130 160 160 160 200

10 11 12 14

Special grease for lathe chucks

Application: Regular lubrication required to maintain high concentricity and clamping force. The special grease will not be thrown off even at high chuck speeds, does not tear off even at high surface pressures and maintains clamping force.

3065

Content kg

Order No. 0010

1

60.80 (W338)

Chip protection for lathe chucks

Application: For inserting into the jaw guide. Prevents chips from penetrating the chuck body.

3072 3114

For scroll chucks ZG-ZS.

For wedge bar chuck DURO-T. 3-piece set.

3072

Size mm 80 100 125 160 200 250 Size mm 160 200 250 315 500

Order No. 0001 0004 0007 0010 0013 0016 0019 0022 Order No. 0001 0004 0007 0010 0013

2.10 2.60 3.40 4.20 5.30 6.60 8.30

315/400 500/630

13.10 (W301)

3114

8.40

10.50 13.10 16.80 21.00 (W302)

3/9

Articles marked ◊ are not held in stock, procurement is effected at short notice.