Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Drilling tools

54

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

Spiral drill with cyl. Shank

Continued

6WHHOV XSWR

6WHHOV XSWR

1021

1021

∅ h8

∅ h8

Order No.

PU

Order No.

PU

Spiral length mm

Total length mm

Spiral length mm

Total length mm

1PP

1PP

f mm/rev

f mm/rev

Cutting Tools 1

mm

mm

TiN

TiN

0280 0290 0300 0310 0320 0330 0340 0350 0360 0370 0380 0390 0400 0410 0420 0430 0440 0450 0460 0470 0480 0490 0500 0510 0520 0530 0540 0550 0560 0570 0580 0590 0600 0610 0620 0630 0640

2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4

10.45

0650 0660 0670 0680 0690 0700 0710 0720 0730 0740 0750 0760 0770 0780 0790 0800 0810 0820 0830 0840 0850 0880 0900 0930 0950 0980 1000 1020 1050 1100 1150 1200 1250 1300 1350 1400

6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.8 9.0 9.3 9.5 9.8

12.30 15.40 15.95 15.75 16.85 18.75 20.60 20.40 20.40 20.50 19.65 21.70 22.30 18.55 21.70 20.40 27.40 28.50 28.50 28.50 23.80 33.10 26.40 39.30 31.60 33.60 30.50 46.10 45.00 45.00 47.10 54.90 59.00 59.00 63.10 78.70 (W115)

10 33 10 33 10 33 10 36 10 36 10 36 10 39 10 39 10 39 10 39 10 43 10 43 10 43 10 43 10 43 10 47 10 47 10 47 10 47 10 47 10 52 10 52 10 52 10 52 10 52 10 52 10 57 10 57 10 57 10 57 10 57 10 57 10 57 5 63 5 63 5 63 5 63

61 0.050 61 0.050 61 0.050 65 0.050 65 0.063 65 0.063 70 0.063 70 0.063 70 0.063 70 0.063 75 0.063 75 0.063 75 0.063 75 0.063 75 0.063 80 0.063 80 0.063 80 0.063 80 0.063 80 0.063 86 0.063 86 0.063 86 0.063 86 0.080 86 0.080 86 0.080 93 0.080 93 0.080 93 0.080 93 0.080 93 0.080 93 0.080 93 0.080 101 0.080 101 0.080 101 0.080 101 0.100

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

63 101 0.100 63 101 0.100 63 101 0.100 69 109 0.100 69 109 0.100 69 109 0.100 69 109 0.100 69 109 0.100 69 109 0.100 69 109 0.100 69 109 0.100 75 117 0.100 75 117 0.100 75 117 0.100 75 117 0.100 75 117 0.100 75 117 0.125 75 117 0.125 75 117 0.125 75 117 0.125 75 117 0.125 81 125 0.125 81 125 0.125 81 125 0.125 81 125 0.125 87 133 0.125 87 133 0.125 87 133 0.125 87 133 0.125 94 142 0.125 94 142 0.125

9.20 8.80 9.20

10.05 10.15

9.10 9.50 7.85 8.60 9.50

11.05

8.90

10.35

9.20

10.25 11.05

9.10

11.60 11.05 11.70 12.00 10.15 10.85 12.65 12.10 13.05 11.20 13.25 14.20 14.60 14.20 11.80 13.95 13.95 14.80 14.70 (W115)

10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0

5 101 151 0.125 5 101 151 0.125 5 101 151 0.160 1 108 160 0.160 1 108 160 0.160

Pin hole conical drill with cyl. Shank

Design: HSS, DIN 1898/1, type N. Right cutting, surface steam tempered from ∅ 3 mm with precise point geometry. Point thinning according to DIN 1412, form A. Normal angle of rake, core thickness and core gradient. Note: Use for manufacturing our pin hole reamer on Ç 1/141. Application: For producing conical holes 1:50 in one step for conical pins according to ISO 2339 (DIN 1) and ISO 8736 (DIN 7978).

DIN 1898/1

Type N

HSS

1:50

118°

steam

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1052

14

10

12

18

1052

∅ h8

Order No.

Spiral length

Total length

mm 2.5 3.0 4.0 5.0 6.0 8.0 10.0 12.0

mm 52 63 74 81 114 157 190 228

mm 86 100 112 122 160 207 245 290

steam

0250 0300 0400 0500 0600 0800 1000 1200

43.20 41.80 44.70 55.40 55.40 90.00

119.50 151.50 (W109)

1/36