Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Magnetic clamping device 711

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

BM permanent-magnetic clamping plate

Design: With transverse pole pitch. A strong permanent-ceramic magnet system with low installation height and narrow pole pitch enables deployment for many tasks. A long and maintenance-free service life is ensured by the cast iron base body and robust upper plate as well as through the magnetic system. Machining of the upper plate without impairing the holding force is possible up to a depth of 15 mm in steel and 7 mm in NFM materials. Attachment on the machining tables is done using 2 clamping jaws. Lines of force: approx. 8 mm above the pole plate, therefore no magnetisation of the tools. Holding force: max. 80–100 N/cm 2 with ground workpiece clamping surface. Application: Ideal for machining on surface grinding machines.

Can furthermore be used on spark erosion systems. Scope of delivery: Clamping plate with 2 stop bars. Note: Further dimensions available on request.

Machining of the upper plate without impairing the holding force is possible up to a depth of 15 mm in steel and 7 mm in NFM materials. The clamping plates are normally supplied with 2 stop bars.

Systems

Clamping

3

3958

Table size A x B mm

Order No. 0010 0020 0030 0040 0050 0060

Pole pitch mm St 6/NE 5 St 6/NE 5 St 6/NE 5 St 6/NE 5 St 6/NE 5 St 6/NE 5

Base area C x D mm

F mm

Weight kg

250 x 150 300 x 150 350 x 150 400 x 200 450 x 200 500 x 200

794.00 ◊ 921.00 ◊ 1021.00 ◊ 1487.00 ◊ 1620.00 ◊ 1759.00 ◊

258 x 147 308 x 147 358 x 147 413 x 197 463 x 197 515 x 197

65 65 65 72 72 72

15 18 21 32 36 40

(W350)

BM permanent-magnetic clamping plate

Design: With transverse pole pitch in reinforced magnetic design. The double and reinforced permanent-ceramic magnetic system distributes the clamping force very highly and evenly. A long and maintenance-free service life is ensured by the solid cast iron base body and robust upper plate as well as through the magnetic system. Machining of the upper plate without impairing the holding force is possible up to a depth of 15 mm in steel and 7 mm in NFM materials. Attachment on the machining tables is done using 2 clamping jaws. Lines of force: approx. 10 mm above the pole plate, therefore no magnetisation of the tools. Holding force: max. 120–150 N/cm 2 with ground workpiece clamping surface. Application: Für difficult cutting machining.. Ideal for milling, planing, drilling, grinding and eroding. Scope of delivery: Clamping plate with 2 stop bars. Note: Further dimensions available on request. Machining of the upper plate without impairing the holding force is possible up to a depth of 15 mm in steel and 7 mm in NFM materials. The clamping plates are normally supplied with 2 stop bars.

3959

Table size A x B mm

Order No. 0010 0020 0030 0040 0050 0060

Pole pitch mm St 8/NE 5 St 8/NE 5 St 8/NE 5 St 8/NE 5 St 8/NE 5 St 8/NE 5

Base area C x D mm

F mm

Weight kg

250 x 150 300 x 150 350 x 150 400 x 200 500 x 200 600 x 200

1013.00 ◊ 1139.00 ◊ 1256.00 ◊ 1757.00 ◊ 2031.00 ◊ 2366.00 ◊

260 x 145 310 x 145 360 x 145 395 x 195 495 x 195 595 x 195

93 93 93 93 93 93

20 24 28 39 49 64

(W350)

3/189

Articles marked ◊ are not held in stock, procurement is effected at short notice.