Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Pocket calipers 726

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

Vernier reading 0.05 mm with 1/20 division

Vernier reading 0.02 mm with 1/50 division

Vernier 1/20 has a measurement value of 0.05 mm, that means 3 graduation marks on the vernier mean 3 x 0.05 mm = 0.15 mm.

Vernier 1/50 has a measurement value of 0.02 mm, that means 3 graduation marks on the vernier mean 3 x 0.02 mm = 0.06 mm. With this accuracy, a threshold is reached, which is just barely readable without aid to the human eye.

Slide, brass

Design: Made of solid brass. Readings in mm and English inches.

4001

Measurement range mm

Order No.

Design

Reading below mm

Jaw length mm

0008 0010 0080 0100

80 100 80 100

7.75 8.15 7.75 8.15

Standard jaw Standard jaw

0.1 0.1 0.1 0.1

25 25 20 20

4001 0008 standard jaw

Nib jaw Nib jaw

(W401)

4001 0010 nib jaw

Equipment

Measuring

Pocket calipers with rectangular depth gauge

4

Design: Made of stainless steel, completely hardened, scale parts and vernier matt chrome-plated. Rear side with thread table. Supplied in an artificial leather case. Application: For inside, outside, depth and step measurements.

DIN 862

INOX

4001

Measurement range mm

Order No.

Design

Reading below mm

Reading above inch

Jaw length mm

4001 0150 with torque locking

0150 0151 0201 0301 0155 0156

150 150 200 300 150 150

20.60 20.60 45.50 80.70 21.90 21.90 (W401)

with torque locking 0.05 1/ 128 40 with locking screw 0.05 1/ 128 40 with locking screw 0.05 1/ 128 50 with locking screw 0.05 1/ 128 60 with torque locking 0.02 1/1000 40 with locking screw 0.02 1/1000 40

4001 0151 with locking screw

Pocket caliper with round depth gauge

Design: Made of stainless steel, completely hardened, scale parts and vernier matt chrome-plated. Rear side with thread table. Supplied in an artificial leather case. Application: For inside, outside, depth and step measurements.

DIN 862

INOX

∅ 1,6 mm

4005

Measure- ment range mm

Order No.

Design

Reading below mm

Reading above inch

Jaw length mm

4005 0150 with torque locking

0150 0151 0155 0156

150 150 150 150

29.30 29.30 30.10 30.10 (W401)

with torque locking 0.05 1/ 128 40 with locking screw 0.05 1/ 128 40 with torque locking 0.02 1/1000 40 with locking screw 0.02 1/1000 40

4005 0151 with locking screw

Design: Made of stainless steel. With lowered head pitch and thread table on the back, with rectangular depth. Supplied in an artificial leather case. Application: For inside, outside, depth and step measurements. Pocket caliper TWIN

DIN 862

INOX

4011

Measure- ment range mm

Order No.

Design

Reading below mm

Reading above inch

Jaw length mm

0151

150

33.10

with locking screw and torque adjustment

0.05 1/128

40

Locking screw + torque locking = TWIN

(W401)

4/6