Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Digital pocket caliper 731

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Protection class overview

First Digit

Importance for protection of operating equipment

Second Water protection Digit 0 Not protected 1

0 1

Not protected

Protection against penetration by solid foreign bodies With a diameter larger than 50 mm Protection against penetration by solid foreign bodies With a diameter larger than 12.5 mm Protection against penetration by solid foreign bodies With a diameter larger than 2.5 mm Protection against penetration by solid foreign bodies With a diameter larger than 1 mm

Protection against vertical drips

2 3 4 5 6 7 8

Protection against dripping water with 15° incline

2

Protection against water spray

Splashproof

3

Protection against jets of water Protection against strong jets of water Protection against temporary submersion Protection against prolonged submersion

4

5 6

Protected against dust

Dust-tight Example: measuring instrument with protection IP 67: (IP – International Protection). This is a dust-proof measuring device that can be briefly submerged.

m

Digital pocket calipers

Design: Made of stainless steel, hardened, lapped guideway, with locking screw, digit height of LCD display 8.5 mm. Supplied with battery CR 2032, 3 V, in a plastic case. Functions: Automatic on and off switch, automatic switching by means of slider movement, mm/inch switching, key lock set for zero position, no re-zeroing after switching (absolute system), reset (zeroing) possible at each position, ± pre-set function (measurement value presetting). Application: For inside, outside, depth and step measurements. Note: Depth measuring bridge 75 x 7 mm (order no. 4024 0075, Ç 4/13). Replacement battery (Order No. 4026 2032, Ç 4/13). Data cable Digimatic (Order No. 4246 0190, Ç 4/54). Data cable USB (Order No. 4246 0195, Ç 4/54). Data cable RS 232 (Order No. 4246 0180, Ç 4/54).

DIN 862

Absolute function

RS232

INOX

USB

Digimatic

Equipment

Measuring

∅ 1,5 mm

4

4020

Measurement range mm

Order No. 1310 1320 1330 1340 1350 1360

Design

Data output

Reading

Jaw length mm

150 150 150 150 200 300

109.50 109.50 135.00 135.00 188.00 239.00 (W488)

with round depth gauge with square depth gauge with round depth gauge with square depth gauge with square depth gauge without depth gauge

– –

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

40 40 40 40 50 64

RS232, Digimatic, USB 0.01 mm (0.0005 inch) RS232, Digimatic, USB 0.01 mm (0.0005 inch) RS232, Digimatic, USB 0.01 mm (0.0005 inch)

–

0.01 mm (0.0005 inch)

Digital pocket caliper waterproof

Design: Made of stainless steel, hardened, measuring faces precision ground, with locking screw, digit height of LCD display 8.5 mm, inductive measurement system. Supplied with battery CR 2032, 3 V, in plastic case. Functions: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, no re-zeroing after switching (absolute system), reset (zeroing) possible at each position, ± pre-set function (measurement value presetting). Application: For inside, outside, depth and step measurements. Note: Replacement battery: (Order No. 4026 2032, Ç 4/13).

DIN 862

INOX IP 67 Absolute

function Certificate

∅ 1,5 mm

4023

Measurement range mm

Order No. 1150 1151 1200 1300

Design

Reading

Jaw length mm

150 150 200 300

138.00 138.00 200.50 259.00 (W404)

with round depth gauge

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

40 40 50 65

with rectangular depth gauge with rectangular depth gauge

without depth gauge

4/11

Articles marked ◊ are not held in stock, procurement is effected at short notice.