Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Workshop calipers 735

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

m

Workshop calipers with tips

Design: Made of stainless steel, hardened. Vernier and reading parts matt chrome-plated, main scale slightly deepened to protect against wear, laser scales, with fine adjustment. Supplied in box, from measuring range 1000 mm individually packed. Application: For inside and outside measurements.

DIN 862

INOX Certificate

4036

Measurement range mm

Order No.

Reading below mm

Reading above inch 1/128 1/128

Jaw length mm

Hole dimension mm

1250 1300 1500 1800 1001

250 300 500 800 1000

177.50 190.00 532.50 697.00 823.00 (W410)

0.05 0.05 0.05 0.05 0.05

80 90 150 150 150

10 10 20 20 20

– – –

Fine adjustment

Design: Made of stainless steel, vernier and scale high-precision laser graduations, with locking screw. Main scale slightly stepped to protect against wear. Supplied in transport packaging. Application: For inside and outside measurements. Workshop caliper without points with long measuring jaw

Factory standard

INOX

4037 4038 4042

Without fine adjustment, reading 0.05 mm, vernier and scale matt chrome plated

Without fine adjustment, reading 0.02 mm, vernier and scale matt chrome plated

Equipment

Measuring

Without fine adjustment, reading 0.05 mm, vernier and scale matt chrome plated

4

4038

4042

4037

Meas- ure- ment range mm 300 400 500 500 800 800 1000 1000 1500 2000 500 500 800 1000

Read- ing below mm

Read- ing above inch

Jaw length mm

Hole dimen-

Order No.

sion mm

4037

0300 0400 0500 0501 0800 0801 1000 1001 1500 2000 0505 0506 0805 1005

247.50 461.50 513.50 612.50 747.50 952.00 1156.00 1579.00 1621.00 2635.00

– – – – – – – – – –

267.00

0.05 1/128 150 10 0.05 – 200 20 0.05 – 200 20 0.05 – 250 20 0.05 – 200 20 0.05 – 300 20 0.05 – 300 20 0.05 – 500 20 0.05 – 300 30 0.05 – 300 30 0.02 – 200 20 0.02 – 250 20 0.02 – 200 20 0.02 – 300 20

– –

612.50

– –

989.00

– – – – – – –

4038/4042

– – – –

562.00 662.50 809.00 1220.00

Fine adjustment

(W407)

(W407)

(W407)

m

Workshop caliper

Design: Made of stainless steel, hardened. Vernier and reading parts matt chrome-plated, main scale slightly deepened to protect against wear, laser scales, with fine adjustment. Supplied in box, from measuring range 1000 mm individually packed. Application: For inside and outside measurements.

DIN 862

INOX Certificate

4043

Measurement range mm

Order No.

Reading below mm

Reading above inch 1/128 1/128

Jaw length mm

Hole dimension mm

0250 0300 0500 0800 1000 1500 2000

250 300 500 800 1000 1500* 2000*

163.00 175.50 461.00 571.00 698.00

0.05 0.05 0.05 0.05 0.05 0.05 0.05

80 90 150 150 150 200 200

10 10 20 20 20 30 30

– – – – –

1495.00 ◊ 2266.00 ◊

Fine adjustment

* without test certificate.

(W410)

4/15

Articles marked ◊ are not held in stock, procurement is effected at short notice.