Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Digital workshop calipers 740

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

Digital workshop caliper with tips

Design: Made of stainless steel, hardened, measuring faces precision ground, with locking screw, digit height of LCD display 8.5 mm for 300 mm and 12.5 mm over 500 mm measuring range, inductive measurement system, with data output variable RS 232, USB and Digimatic (DATA Variable). Supplied with battery CR 2032, 3 V, in a wooden case. Functions: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, no re-zeroing after switching (absolute system), reset (zeroing) possible at each position, ± pre-set function (measurement value presetting). Application: For inside and outside measurements. Note: Replacement battery: (Order No. 4026 2032, Ç 4/13).

DIN 862

INOX IP 65

Absolute function Certificate RS232

USB

Digimatic

Data cable USB (Order No. 4025 0003, Ç 4/13). Data cable Digimatic (Order No. 4025 0004, Ç 4/13). Data cable RS 232 available on request.

4061

Measurement range mm

Order No. 0301 0501 1001

Reading

Jaw length mm

Hole dimension mm

300 500 1000

448.50 843.00 1291.00

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

90 125 150

10 20 20

(W404)

m

Digital workshop caliper with tips

Design: Made of stainless steel, inductive measurement system, with locking screw, digit height of LCD display 8.5 mm for 300 mm and 12.5 mm over 500 mm measuring range, inductive measurement system, with data output variable RS 232, USB and Digimatic (DATA Variable). Supplied with battery CR 2032, 3 V, in wooden case. Functions: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, no re-zeroing after switching (absolute system), reset (zeroing) possible at each position, ± pre-set function (measurement value presetting). Application: For inside and outside measurements. Note: Replacement battery: (Order No. 4026 2032, Ç 4/13).

Equipment

Measuring

DIN 862

INOX Absolute function

4

Certificate RS232 Digimatic

USB

Data cable USB (Order No. 4025 0003, Ç 4/13). Data cable Digimatic (Order No. 4025 0004, Ç 4/13). Data cable RS 232 available on request.

4060

Measurement range mm

Order No. 1130 1150 1180 1110

Reading

Jaw length mm

Hole dimension mm

300 500 800 1000

403.00 612.00 999.50 1210.00

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

90 125 150 150

10 20 20 20

(W410)

Digital aluminium workshop caliper, extra light

Design: Measuring faces made of stainless steel, hardened, lightweight construction, slide and bar made of aluminium, hard anodised (1100 HV). Easy, even running due to double prism guide. With locking screw and knife-edge points, digit height of LCD display 10.5 mm. Supplied with battery CR 2032, 3 V, in a wooden case.

Factory standard

Functions: Switch-on and switch-off, mm/inch-switching, reset (zeroing) possible in any position, hold function (measurement value memory). Application: For inside and outside measurements. Note: Replacement battery: (Order No. 4026 2032, Ç 4/13).

4063

Measurement range mm

Order No.

Reading

Jaw length mm

Hole dimension mm

Weight

g

0300 0500 0800 1000

300 500 800 1000

533.00 740.50 1041.00 1228.00

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

90 150 150 150

10 20 20 20

450 1300 1550 1700

(W404)

4/20