Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Digital depth gauge calipers/depth gauge 747

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

m

Digital depth gauge calipers with stepped measuring rod

Design: Made of rustproof steel, hardened, with locking screw, digit height of LCD display 7.5 mm, with data output variable RS 232, USB and Digimatic (DATA Variable). Supplied in wooden case. Functions: On and automatic off switch, mm/inch switching, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position, ± pre-set function (setting a numerical value). Note: Replacement battery: (Order No. 4026 2032, Ç 4/13). Data cable Digimatic (Order No. 4025 0004, Ç 4/13). Data cable USB (Order No. 4025 0003, Ç 4/13). Data cable RS 232 available on request.

Factory standard

Absolute function

RS232

INOX

IP 67

Certificate

USB Digimatic

4093

Measurement range mm

Order No.

Reading

Bridge length mm

Measuring bar cross-section mm

5300 5500

300 500

432.50 503.00 (W410)

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

150 150

12 x 4 12 x 4

Depth gauge with bored through toothed rack

Design: For mounting the adjustable depth gauge needle with ∅ 2 mm and a measuring depth from 200 mm. The depth gauge needle is stretched and adjusted by means of the cord screw at the top of the gauge. Supplied in plastic case.

Factory standard

Equipment

Measuring

4093

Measurement range mm

Order No. 1030

Reading mm

Housing ∅ mm

1 pointer revolution mm

4

30

218.50 (W423)

0.01

58

1

Measuring needle for depth gauge with bored through toothed rack

4093

Measurement range mm

Order No. 0002

200

8.60 (W423)

Depth gauge

Design: The measuring bridge matt chrome-plated and hardened. Support surface finely lapped. The clamping collet made of metal guarantees reliable clamping of the dial gauge and thus increases the measurement certainty. An additional socket head screw makes it easier to replace the dial gauge. Measuring insert with external thread M2.5. The millimetre display on Order No. 4093 0030 has a concentric layout, permitting a simple and reliable reading. Supplied with a 10 mm-long special measuring insert and measuring bridge 80 x 16 mm, in plastic case. Note: You can find suitable measuring inserts on Ç 4/49.

Werks- norm Factory standard

4093

Measurement range mm

Order No.

Reading

Housing ∅

Support surface

1 pointer revolution mm

mm

mm

mm

0010 0030

10 30

124.50 176.00 (W423)

0.01 0.01

58 58

80 x 16 80 x 16

1 1

4093 0010

4093 0030

Measuring bridge for depth gauge

Design: The measuring bridges have a mounting hole ∅ 8 mm H7. They are matt chrome-plated and hardened. The support surfaces are finely lapped.

4093

Dimensions mm

Order No. 0050 0080 0120 0150

50 x 16 80 x 16 120 x 20 150 x 20

58.00 58.00 66.60 92.90 (W423)

4093 0050–0150

4/27

Articles marked ◊ are not held in stock, procurement is effected at short notice.