Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Digital outside micrometer 753

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

m

Digital outside micrometer

Design: Measuring spindle rustproof, fully hardened and ground, lacquered steel bracket, advance ratchet stop, quick drive and thermal protection. Digit height of the LCD display 8.5 mm, protection in acc. with IP 65, data output RS 232, Digimatic and USB . Supplied with battery CR 2032, 3 V, in case. Functions: On and automatic off switch, mm/inch switching, automatic switching by means of turning the drum, key lock set for zero position, re-zeroing after switching deleted (absolute system), ABS (switching from relative to absolute measurement), reset (zeroing) possible at each position, ± pre-set function (setting a numerical value). Note: Replacement battery: (Order No. 4026 2032, Ç 4/13). Radio receiver (Order No. 4942 0030, Ç 4/129). Transmitter module for e-Stick (Order No. 4942 0040, Ç 4/130).

DIN 863-1

INOX Absolute function

IP 65 RS232 USB

Digimatic

Data cable RS 232 (Order No. 4942 0055, Ç 4/130). Data cable USB (Order No. 4942 0050, Ç 4/130). Data cable Digimatic (Order No. 4246 0185, Ç 4/54).

4111

Measurement range mm

Order No. 2025 2050 2075 2100 2125 2150 2175 2200

Reading mm

Spindle ∅ mm

Gradient mm

0– 25* 25– 50* 50– 75* 75–100* 100–125 125–150 150–175 175–200

259.00 297.00 389.00 447.00 600.00 615.00 633.00 645.00 (W488)

0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001

6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5

0.635 0.635 0.635 0.635 0.635 0.635 0.635 0.635

Equipment

Measuring

* Factory standard

4

m

Digital outside micrometer set

4111

Measurement range mm

Order No. 2210

Set contents

0–100

1365.00

1 outside micrometer, 0– 25 mm 1 outside micrometer, 25– 50 mm 1 outside micrometer, 50– 75 mm 1 outside micrometer, 75–100 mm) 3 setting standards, 25; 50 and 75 mm

(W488)

Outside blade micrometer for external grooves

Design: Reading parts matt chrome-plated, hardened steel measuring surfaces, measuring force regulation by means of ratchet stop, with non-rotating spindle and hand thermal insulation. Supplied with adjustment key, from measuring range 25-50 mm with setting measurement, in a plastic case. Application: For measuring outer grooves.

Factory standard

4119

Measurement range mm

Order No. 0025 0050 0075 0100

Reading mm

Spindle ∅ mm

Gradient mm

Drum ∅ mm

Measuring face mm

0– 25 25– 50 50– 75 75–100

286.00 0.01 346.50 0.01 372.00 0.01 403.00 0.01

6.5 6.5 6.5 6.5

0.5 18.0 0.75 x 6.0 0.5 18.0 0.75 x 6.0 0.5 18.0 0.75 x 6.0 0.5 18.0 0.75 x 6.0

(W416)

Outside disc micrometer for tooth width measurements

Design: Reading parts matt chrome-plated, hardened spindle, lapped measuring plane-parallel plate, measuring force regulation by means of ratchet stop, with hand thermal insulation, locking by means of clamping lever. Supplied with adjustment key, in a plastic case. Application: For reference-free measuring tooth widths of spur gears and toothed wheels for modules 0.5–6.0 mm. Also suitable for measuring the thickness of soft materials such as rubber, plastic, paper, etc.

DIN 863

4120

Measurement range mm

Order No. 0025 0050 0075 0100 0125 0150

Reading mm

Spindle ∅ mm

Gradient mm

Drum ∅ mm

Measuring plate mm

0– 25 25– 50 50– 75 75–100 100–125 125–150

84.60 0.01 93.80 0.01 109.00 0.01 121.50 0.01 143.00 0.01 149.00 0.01

6.5 6.5 6.5 6.5 6.5 6.5

0.5 17.0 0.5 17.0 0.5 17.0 0.5 17.0 0.5 17.0 0.5 17.0

20.0 20.0 20.0 20.0 30.0 30.0

(W416)

4/33

Articles marked ◊ are not held in stock, procurement is effected at short notice.