Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Parallel gauge block sets 791

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Parallel gauge block set, ceramic

Design: Made of zirconium oxide ceramic, extremely wear-resistant and corrosion-free. Each gauge block is marked with an individual ID No. Supplied in a wooden box. Tolerance class 1: Most often-used standard in the measurement room for the inspection of gauges and for setting measuring instruments.

DIN EN ISO 3650

Certificate

4374

4374

Number in set

Number in set

Order No. 1032

Dimensions in mm

Graduation mm

Number

Order No. 1047

Dimensions in mm

Graduation mm

Number

32 1017.00

1 9 9 9 3 1

– 0.01

1.005 1.01– 1.09 1.10– 1.90 1.00– 9.00 10.00–30.00 50.00

47 1414.00 1.005

– 0.01

1 20 7 9 10

1.01 – 1.20 1.30 – 1.90 1.00 – 9.00 10.00 –100.00

0.1 1.0 10.0 –

0.1 1.0 10.0

(W436)

(W436)

Gauge block test set for caliper

Design: Made of high-quality, specially alloyed and unstressed special steel of high stability and good adhesive properties. The hardness of the gauge blocks is 800 HV (64 HRC), making them highly stable and exceptionally wear resistant. Each gauge block is marked with an individual ID number. Supplied in a wooden box. Tolerance class 1: Most often-used standard in the measurement room for the inspection of gauges and for setting measuring instruments. For lengths 0.5 to 10.0 mm, the height is 30 mm and the depth 9 mm. For 10.0 to 1000.0 mm, the height is 35 mm and the depth 9 mm. Application: For verification in acc. with VDI/VDE/DGQ Z 2618, Sheet 8, of calipers.

DIN EN ISO 3650

Equipment

Measuring

4

Number in set 4126

Order No. 0003

Nominal dimension mm 30.0/41.3/131.4

3

171.50

(W436)

Optical flat diameter

Design: Flat glass plate for checking evenness and slip test on high-precision, even surfaces acc. to the interference method. Supplied in a wooden box.

4130

∅ mm

Order No. 1045

Thickness mm

Evenness µm

45

161.00

15

0.1

(W436)

m

Calibration pin set

Design: Made of gauge steel, hardened, aged several times. Application: As setting gauge for displaying measuring devices, for the examination of axle distances, cones and other workpieces in connection with gauge blocks, for the determination of the flange diameter of threads or partial circle diameters of toothing.

4390 0010 4390 0015 + 0025 4390 0020 + 0030

Tolerance class 0 Lapped Tolerance class 1 Lapped

Number 4390

Order No.

Measurement range

Graduation

Tolerance

mm

mm

Tol. 1

Tolerance class 2 Ground

0015 0025

41 1305.00◊ 91 1855.00◊

0.1–0.5 0.1–1.0

0.01 0.0010 0.01 0.0010

(W489)

Number 4390

Order No.

Measurement range

Graduation

Tolerance

Number 4390

Order No.

Measurement range

Graduation

Tolerance

mm

mm

Tol. 2

mm

mm

Tol. 0

0020 0030

41 945.00◊ 91 1115.00◊

0.1– 0.5 1.0–10.0

0.01 0.0015

0010

41 1870.00◊

0.1

0.0015

0.1–0.5

0.01 0.0005

(W489)

(W489)

4/71

Articles marked ◊ are not held in stock, procurement is effected at short notice.