Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Small gauges/thickness gauges 802

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

ISO tolerance slide

Design: Made of aluminium, anodised, deep black print, sealed against scratches, with tables on the front and back. Application: For direct reading of standard bore holes H6 to H13 acc. DIN 7154 from 1–160 mm ∅ and standard shafts h5 to h12 acc. to DIN 7155 from 1–160 mm ∅.

4480

Dimensions mm

Order No. 0001

280 x 80

22.50 (W447)

DIN thread slide

Execution: Made of aluminium, anodised, deep-black print, sealed against scratches, with tables on front and back side for metric ISO thread (DIN 13), Withworth thread (DIN 11), Withworth pipe thread (DIN 259). Application: For the direct reading of all fundamental theoretical thread dimensions as well as wedge width, wedge height and shaft and hub keyway depth for 10–500 mm shaft ∅.

4481

Dimensions mm

Order No. 0001

260 x 50

17.95 (W447)

Display device

4482 0001 4482 0002 4482 0003

ISO tolerance key Tolerator. For reading all tolerance values.

Equipment

Measuring

ISO thread indicator Filetor. For reading all determinations of a thread. Measurement convertor Convertor. For converting mm to inches and vice versa.

4

Tolerator

4482

Design

Order No. 0001 0002 0003

Dimensions mm

Filetor

Tolerator

82.30 82.30 82.30 (W447)

60 x 30 x 110 60 x 30 x 110 60 x 30 x 110

Filetor

Convertor

Convertor

Feeler gauge

Application: For inspecting intermediate spaces, contact distances, etc.

4483 4485 4487

Sensor gauge. Blades made of hardened spring steel, individually labelled with the size, conically tapering in high-gloss nickel-plated shell, with locking nut. Sensor gauge, antimagnetic Blades made of brass, individually labelled with the size, conically tapering, with locking nut. Piston clearance gauge. Blades made of spring steel, individually labelled with the size, conically tapering, with locking nut.

4483

4485

4487

4485

4487

4483

Number of blades

Order No. 0008 0013 0013 0020 0020 0021

Measurement range mm

Blade length mm

8

1.99 2.50

– – –

– –

0.05-0.5 to 0.3 mm by 0.05 mm, above this increasing by 0.1 mm 100 0.05–1.00 to 0.3 mm by 0.5 mm, above this increasing by 0.1 mm 100 0.05-1.00 to 0.3 mm by 0.05 mm, above this increasing by 0.1 mm 300

13 13 20 20 21

–

13.60

4.18

17.55

–

0.05-1.00 mm, increasing by 0.05 mm 0.05-1.00 mm, increasing by 0.05 mm

100 300

–

– –

20.20

7.60

–

0.05-2.00 to 0.1 mm by 0.05 mm, above this increasing by 0.1 mm 100

(W447)

(W447)

(W447)

4/82