Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Squares 815

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Steel square

Design: Made of steel, galvanised, machined on all sides. Application: For simple straightening work and marking off work.

4601 4602

Flat square

Stop angle

4601

4602

4602

4601

Stock length mm 100 x 70 150 x 100 200 x 130 250 x 160 300 x 180 400 x 230 500 x 280 750 x 375 1000 x 500

Order No. 0100 0150 0200 0250 0300 0400 0500 0750 1000

Cross-section mm

4.24 5.25 6.65 7.05 8.45

7.20 8.50

20 x 5 20 x 5 20 x 5 25 x 5 25 x 5 30 x 5 30 x 5 30 x 5 30 x 5

11.20 14.45 15.60 21.70 28.60 43.90 60.20 (W453)

10.20 12.60 19.25 26.20 (W453)

Equipment

Measuring

4

Flat square and stop angle

Design: Made of special steel, rectangularity, parallelism and planarity tolerances, flat sides, high edges and test surfaces ground. Application: For precise work in mechanical engineering and in the workshop. Note: Flat square (Order No. 4611) and stop angle (Order No. 4612) available up to 2000 mm on request.

DIN 875/II

4603 4604 4611 4612

Flat square

Stop angle

Flat square

Stop angle

4612

4604

4603

4611

4604

4611

4612

4603

Stock length mm 75 x 50 100 x 70 150 x 100 200 x 130 250 x 165 300 x 175 400 x 200 500 x 250 750 x 375 1000 x 500

Order No. 0075 0100 0150 0200 0250 0300 0400 0500 0750 1000

Cross-section mm

Angle tolerance mm

6.15 6.45 8.10

7.40 8.70

6.20 6.50 8.90

8.00 8.90

15 x 5 20 x 5 25 x 5 30 x 6 35 x 7 35 x 7 35 x 7 40 x 8 45 x 10 50 x 10

0.028 0.030 0.035 0.040 0.045 0.050 0.060 0.070 0.095 0.120

12.10 16.00 20.80 26.40 40.60 51.60 80.80

12.75 16.35 22.20 27.90 42.80 56.70 96.60

10.15 13.70 19.40 28.00 39.20 67.30 98.60 (W454)

10.80 14.90 19.10 28.80 42.10 75.60

122.00 (W454)

110.00 (W410)

133.50 (W410)

4/95

Articles marked ◊ are not held in stock, procurement is effected at short notice.