Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Squares 817

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Precision hair angle, rustproof

Design: Made of hardened, rustproof steel, rectangularity, parallelism and evenness tolerances. For highest accuracy. Upright edges and straightedges finely ground. Supplied in transport packaging. Application: For checks and inspection work using the light-gap method.

DIN 875/00

INOX

4621

Stock length

Order No.

Cross-section

Angle tolerance mm

mm

mm

0500 0750 1000 1500 2000 3000 5000

50 x 40 75 x 50 100 x 70 150 x 100 200 x 130 300 x 200 500 x 330

24.20 28.50 34.20 44.20 65.10

14 x 4 15 x 4 20 x 5 25 x 6 30 x 7 40 x 8 40 x 10

0.003 0.003 0.003 0.004 0.004 0.005 0.007

143.00 681.50 (W410)

Precision hair angle with each one wide and one narrow arm, stainless and hardened

Design: Made of hardened, rustproof steel, rectangularity, parallelism and evenness tolerances. For highest accuracy. Upright edges and straightedges finely ground. Supplied in transport packaging. Application: For checks and inspection work using the light-gap method.

DIN 875/00

INOX

4622

Equipment

Stock length

Order No.

wide arm cross-section mm

narrow arm cross-section mm

Angle tolerance mm

Measuring

4

mm

0500 0750 1000 1500 2000 3000

50 x 40 75 x 50 100 x 70 150 x 100 200 x 130 300 x 200

56.70 56.70 73.50 92.40

14 x 10 14 x 10 16 x 10 20 x 12 24 x 14 30 x 18

16 x 2 18 x 2 18 x 2 22 x 3 26 x 3 32 x 3

0.003 0.003 0.003 0.004 0.004 0.005

125.00 182.50 (W410)

Precision bevelled square with sliding ruler

Design: Rectangularity, parallelism and evenness tolerances. For highest accuracy. Reading parts matt chrome-plated, straightedge 7 x 7 x 100 mm, slidable, adjustable angle up to ± 5°. Supplied in a wooden box. Application: For checks and inspection work using the light-gap method.

4623

Handle

Order No.

Angle tolerance mm

mm

0010

35 x 13 x 60

213.00 (W410)

0.007

Precision die maker's square, stainless

Design: Made of hardened, rustproof steel, rectangularity, parallelism and evenness tolerances. For maximum precision, Chamfered bevelled edge on the inside of the long arm. Upright edges and flat sides accurately and precision ground, test surfaces ground. Angle 90°. Supplied in transport packaging. Application: For use in tool and fixture construction.

DIN 875/00

INOX

4625

Stock length

Order No.

wide arm cross-section mm

narrow arm cross-section mm

Angle tolerance mm

mm

0250 0400

25 x 20 40 x 28

18.05 18.05 (W410)

6.0 x 3.5 8.0 x 3.5

5.0 x 3.5 5.0 x 3.5

0.003 0.003

4/97

Articles marked ◊ are not held in stock, procurement is effected at short notice.