Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro
Directional spirit levels/Straight edges 820
Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro
m
Precision directional spirit level
Design: Made of high-grade special casting, structure painted. Flat and prismatic measuring face (150°), finely ground Longitudinal level, cross level, and full heat protection, longitudinal
DIN 877
level can be viewed from the side. Supplied in a case. Application: For the exact aligning of surface and shafts.
4780
Accuracy mm/m
Order No. 0160 0200 0300 0161 0201 0301 0162 0202 0302
Dimension mm
Measurement range ± mm/m
0.3 0.3 0.3 0.1 0.1 0.1
132.50 153.00 185.00 143.00 169.00 205.00 235.00 279.00 330.00 (W471)
160 x 42 x 42 200 x 42 x 42 300 x 42 x 42 160 x 42 x 42 200 x 42 x 42 300 x 42 x 42 160 x 42 x 42 200 x 42 x 42 300 x 42 x 42
1.80 1.80 1.80 0.60 0.60 0.60 0.12 0.12 0.12
0.02 0.02 0.02
m
Frame dir. spirit level
Design: Made of high-grade special casting, structure painted. Flat and prismatic measuring face (150°), finely ground Longitudinal level, cross level, and full heat protection, longitudinal level can be viewed from the side. Supplied in a case. Application: For the exact aligning of horizontal and vertical surfaces and shafts.
DIN 877
4780
Accuracy mm/m
Order No. 1503 2003 1501 2001 1502 2002
Dimension mm
Measurement range ± mm/m
Equipment
Measuring
4
0.3 0.3 0.1 0.1
263.00 313.00 307.00 377.00 452.00 548.00 (W471)
150 x 150 x 42 200 x 200 x 42 150 x 150 x 42 200 x 200 x 42 150 x 150 x 42 200 x 200 x 42
1.50 1.80 0.50 0.60 0.10 0.12
0.02 0.02
m
Crankpin spirit level
Design: Made of high-grade special casting, structure painted. Flat, prismatic measuring face (150°), longitudinal and transverse prims, finely ground Longitudinal level, cross level, and full heat protection, delivery in case. Application: For the exact alignment of very short horizontal surfaces, cranks and pins on engines or machines.
DIN 877
4780
Accuracy mm/m
Order No. 3001 3002
Dimension mm
Measurement range ± mm/m
0.1 0.2
167.00 156.50 (W471)
90 x 42 x 42 60 x 42 x 42
0.2 0.2
m
Precision straight edge
Design: Made of tool steel, raised edges and flat sides processed with great accuracy. With I-shaped cross-sections. Application: For inspections and for highly accurate work in precision mechanical engineering.
DIN 874/I
DIN 874/II
Certificate
4757
4757
Length
Length
Order No.
Order No.
Width
Thickness
Width
Thickness
mm
mm
mm
mm
mm
mm
DIN 874/I
DIN 874/II
0501 1001 1501 2001
500 1000 1500 2000*
46.60
0502 1002 1502 2002
500 1000 1500 2000
36.20 67.30
40 50 60 70
8
30 40 50 60
6 8
103.50 176.00 548.50 (W457)
10 12 14
134.50 176.00 (W457)
10 12
* With 2 hand slots
4/100
Made with FlippingBook Online document