Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Concentricity gauges 824

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

Design: Contact surface finely ground, evenness acc. DIN 876-2. With 2 sliding tailstocks. Left tailstock with fixed tip, right tailstock with sprung tip, stroke approx. 10 mm. Lock of tailstocks via eccentric clamp. With T-groove and measuring stand. With dial gauge adapter ∅ 8 mm H7 and fine adjustment. Supplied in transport packaging. Concentricity gauge

DIN 876-2

4315

Tip height mm

Order No.

Tip width mm

T-slot width mm

Base plate mm

0200 0350 0275 0375

50 50 75 75

610.00 774.00 697.00 794.00 (W410)

200 350 200 350

10 350 x 110 10 500 x 110 10 350 x 110 10 500 x 110

Tailstock left

Design: With rotary collet chuck device. Note: Collet F10 from 1–7 mm available upon request.

Equipment

Measuring

4315

4

Tip height mm

Order No. 1005 1010

T-slot width mm

50 75

379.00 420.00 (W410)

10 10

Prism insert pair

Application: Prism inserts are replaced at the tips in the tailstocks.

4315

Tip height mm

Order No. 1000

Prism mount ∅ mm

50/75

88.20 (W410)

3–15

Concentricity gauge with disk blocks

Design: Concentricity gauge Without points, disc blocks can be moved on the base plate. 1 disc block can be adjusted 30 mm in height for diameter alignment High accuracy due to backlash-free bearing-supported rotating discs, concentricity 5 µm, bearing capacity maximum 50 kg. Supplied with measuring stand, in transport packaging.

Note: Supplied without dial gauge. Dial gauges are found from Ç 4/45.

4315

Disc distance max. mm

Order No.

Workpiece ∅ max. mm

Disk ∅ mm 120

0401

400

3125.00 ◊

250

(W410)

4/104