Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Drilling tools

84

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

Solid Carbide spiral drill, SuperLine, 3 x D

Design: Ultra-finest grain-solid carbide, DIN 6537, type RT 100 U. Fire coated surface, right cutting with special point geometry and ratio point thinning. Normal angle of rake, core thickness thicker than normal and without core gradient. The drill has a very good self-centring behaviour and produces short chips, even from long-chipping materials. Carbide application group: K/P – universal use. (Ultra-fine grain K05–K50/P05–P50) Application: For accurate holes with narrow ∅ tolerances and good surfaces. Suitable for drilling holes up to 3 x D with the best cutting values. Particularly suitable for long and short-chipping materials such as GGS and ADI, casting materials, grey cast iron, nodular graphite iron and malleable cast iron, high alloy AlSi alloys and alloy steels up to 1200 N/mm 2 in strength.

Type RT 100 U

DIN 6537

Solid carbide

3xD

140°

Cutting Tools 1

3

DIN 6535-HA

1200 Fire

DIN 6535-HE

1203 Fire

DIN 6535-HA

1206 Fire

DIN 6535-HE

1209 Fire

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1200 1203 1206 1209

110 110 125 125

105 105 120 120

85 85 85 85

155 155 140 140

55 55 65 65

45 45 55 55

35 35 45 45

25 25 35 35

15 15 25 25

55 55 60 60

40 40 45 45

260 260 310 310

270 270 325 325

6WHHOV XSWR

1200

1203

1206

1209

∅ d 1 = m7 mm 3.00 3.10 3.17 3.20 3.25 3.30 3.40 3.50 3.57 3.60 3.70 3.80 3.90 3.97 4.00 4.10 4.20 4.30 4.37 4.40 4.50 4.60 4.65 4.70 4.76 4.80 4.90 5.00 5.10

Order No.

Spiral length I 2 mm

Shank length I 3 mm

Overall length l 1 mm

Shank ∅ d 2 = h6 mm

1PP

f mm/rev

Fire

Fire

Fire

Fire

0300 0310 0317 0320 0325 0330 0340 0350 0357 0360 0370 0380 0390 0397 0400 0410 0420 0430 0437 0440 0450 0460 0465 0470 0476 0480 0490 0500 0510

29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 (W112)

30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 30.50 (W112)

37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 (W112) 40.00 ◊ 40.00 ◊ 37.00 ◊ 37.00 ◊

38.00 38.00

20 20 20 20 20 20 20 20 20 20 20 24 24 24 24 24 24 24 24 24 24 24 24 24 28 28 28 28 28

36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36

62 62 62 62 62 62 62 62 62 62 62 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

0.080 0.080 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.125

38.00 ◊

38.00

38.00 ◊

38.00 38.00 38.00

29.50 ◊

38.00 ◊ 38.00 ◊

30.50 ◊

38.00 38.00 38.00

30.50 ◊

38.00 ◊

41.50

41.50 ◊

41.50 41.50

30.50 ◊

41.50 ◊ 41.50 41.50 41.50 41.50 41.50 41.50 41.50 41.50 41.50 (W112) 41.50 ◊

30.50 ◊

Continued overleaf

1/66